Mundorf
€29.03 IT/piece |
![]() |
Mundorf BH125 aronit core coil, 4.7mH ±3%, 0.27ohm, 1.25mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH125-4,7
BH125-4,7
|
Mundorf
€257.03 IT/piece |
![]() |
Mundorf VN300 feron core coil, 6.8mH ±5%, 0.06ohm, 3.00mm OFC-copper wire, L130xH115xZ97mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN300-6,8
VN300-6,8
|
Mundorf
€64.20 IT/piece |
![]() |
Mundorf VT140 feron core coil, 1.8mH ±3%, 0.11ohm, 1.40mm OFC-copper wire, L84xH60xZ60mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT140-1,8
VT140-1,8
|
Mundorf
€222.76 IT/piece |
![]() |
Mundorf VLCU12 paper air copper foil coil, 3.9mH ±2%, 0.41ohm, 44x0.07mm OFC-copper wire, Ø103xH53mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU12-3,9
VLCU12-3,9
|
Mundorf
€20.48 IT/piece |
![]() |
Mundorf BH71 ferrite core coil, 18mH ±3%, 1.28ohm, 0.71mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€55.57 IT/piece |
![]() |
Mundorf VSCU15 feron core copper foil paper coil, 2.2mH ±3%, 0.18ohm, 1.40mm OFC-copper wire, L84xH47xZ47mm, with vaccum impregnated wire
VSCU15-2,2
VSCU15-2,2
|
Mundorf
€428.48 IT/piece |
![]() |
Mundorf VT390 feron core coil, 3.3mH ±3%, 0.05ohm, 3.90mm OFC-copper wire, L150xH115xZ121mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT390-3,3
VT390-3,3
|
Mundorf
€72.75 IT/piece |
![]() |
Mundorf CFC12 air copper foil coil, 0.56mH ±2%, 0.14ohm, 44x0.07mm OFC-copper wire, Ø57xH52mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC12-0,56
CFC12-0,56
|