Mundorf
€32.48 IT/piece |
![]() |
Mundorf BH180 aronit core coil, 1.2mH ±3%, 0.08ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-1,2
BH180-1,2
|
Mundorf
€13.59 IT/piece |
![]() |
Mundorf BL140 air core coil, 0.18mH ±2%, 0.11ohm, 1.40mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-0,18
BL140-0,18
|
Mundorf
€24.50 IT/piece |
![]() |
Pipe core coil Mundorf H140, 3mH ±3%, 0.19ohm, Ø51xL51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H140-3,0
H140-3,0
|
Mundorf
€20.42 IT/piece |
![]() |
Mundorf VLCU18 paper air copper foil coil, 0.33mH ±2%, 0.25ohm, 11.5x0.07mm OFC-copper wire, Ø44xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-0,33
VLCU18-0,33
|
Mundorf
€12.54 IT/piece |
![]() |
Mundorf H50 ferrite core coil, 15mH ±3%, 2.01ohm, 0.50mm OFC-copper wire, Ø30xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€4.78 IT/piece |
![]() |
Mundorf BL71 air core coil, 0.022mH ±2%, 0.09ohm, 0.71mm OFC-copper wire, Ø25xH10mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,022
BL71-0,022
|
Mundorf
€18.70 IT/piece |
![]() |
Mundorf LL45 litz wire air core coil, 0.22mH ±2%, 0.18ohm, 7x0.45mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL45-0,22
LL45-0,22
|
Mundorf
€20.42 IT/piece |
![]() |
Mundorf L71 air core coil, 6.8mH ±2%, 2.61ohm, 0.71mm OFC-copper wire, Ø58xH18mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L71-6,80
L71-6,80
|