Mundorf
€18.57 IT/piece |
![]() |
Mundorf LL60 litz wire air core coil, 0.1mH ±2%, 0.07ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø18xL58mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-0,10
LL60-0,10
|
Mundorf
€10.86 IT/piece |
![]() |
Mundorf H100 ferrite core coil, 1mH ±3%, 0.13ohm, 1.00mm OFC-copper wire, Ø30xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H100-1,0
H100-1,0
|
Mundorf
€12.74 IT/piece |
![]() |
Mundorf BL125 air core coil, 0.22mH ±2%, 0.14ohm, 1.25mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-0,22
BL125-0,22
|
Mundorf
€4.02 IT/piece |
![]() |
Mundorf L50 air core coil, 0.22mH ±2%, 0.59ohm, 0.50mm OFC-copper wire, Ø25xH10mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-0,22
L50-0,22
|
Mundorf
€21.77 IT/piece |
![]() |
Mundorf H140 ferrite core coil, 2.2mH ±3%, 0.14ohm, 1.40mm OFC-copper wire, Ø40xH37mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H140-2,2
H140-2,2
|
Mundorf
€18.70 IT/piece |
![]() |
Mundorf VLCU18 paper air copper foil coil, 0.22mH ±2%, 0.2ohm, 11.5x0.07mm OFC-copper wire, Ø40xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-0,22
VLCU18-0,22
|
Mundorf
€25.58 IT/piece |
![]() |
Mundorf BH125 ferrite core coil, 3.9mH ±3%, 0.24ohm, 1.25mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH125-3,9
BH125-3,9
|
Mundorf
€13.37 IT/piece |
![]() |
Mundorf H100 ferrite core coil, 2.2mH ±3%, 0.2ohm, 1.00mm OFC-copper wire, Ø35xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H100-2,2
H100-2,2
|