Mundorf
€59.69 IT/piece |
![]() |
Mundorf BL180 air core coil, 1.5mH ±2%, 0.28ohm, 1.80mm OFC-copper wire, Ø70xH59mm, with backed varnish wire
BL180-1,5
BL180-1,5
|
Mundorf
€20.42 IT/piece |
![]() |
Mundorf CFC18 air copper foil coil, 0.56mH ±2%, 0.35ohm, 11.5x0.07mm OFC-copper wire, Ø47xH18mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC18-0,56
CFC18-0,56
|
Mundorf
€17.58 IT/piece |
![]() |
Mundorf H125 ferrite core coil, 2.2mH ±3%, 0.17ohm, 1.25mm OFC-copper wire, Ø40xH37mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H125-2,2
H125-2,2
|
Mundorf
€6.07 IT/piece |
![]() |
Mundorf BL71 air core coil, 0.15mH ±2%, 0.31ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,15
BL71-0,15
|
Mundorf
€20.42 IT/piece |
![]() |
Mundorf L140 air core coil, 0.56mH ±2%, 0.2ohm, 1.40mm OFC-copper wire, Ø58xH22mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L140-0,56
L140-0,56
|
Mundorf
€15.29 IT/piece |
![]() |
Mundorf BL125 air core coil, 0.39mH ±2%, 0.2ohm, 1.25mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-0,39
BL125-0,39
|
Mundorf
€26.48 IT/piece |
![]() |
Mundorf BH180 aronit core coil, 0.56mH ±3%, 0.05ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-0,56
BH180-0,56
|
Mundorf
€85.31 IT/piece |
![]() |
Mundorf BL125 air core coil, 10mH ±2%, 1.49ohm, 1.25mm OFC-copper wire, Ø70xH59mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |