Mundorf
€36.89 IT/piece |
![]() |
Mundorf BS100 feron core coil, 8.2mH ±3%, 0.58ohm, 1mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 84x29xH29mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
€22.98 IT/piece |
![]() |
Mundorf LL60 litz wire air core coil, 0.15mH ±2%, 0.09ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø18xL58mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-0,15
LL60-0,15
|
Mundorf
€3.51 IT/piece |
![]() |
Mundorf L50 air core coil, 0.15mH ±2%, 0.45ohm, 0.50mm OFC-copper wire, Ø25xH10mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-0,15
L50-0,15
|
Mundorf
€85.31 IT/piece |
![]() |
Mundorf BL125 air core coil, 10mH ±2%, 1.49ohm, 1.25mm OFC-copper wire, Ø70xH59mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |
Mundorf
€20.09 IT/piece |
![]() |
Mundorf H140 ferrite core coil, 1.8mH ±3%, 0.12ohm, 1.40mm OFC-copper wire, Ø40xH37mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H140-1,8
H140-1,8
|
Mundorf
€22.98 IT/piece |
![]() |
Mundorf L100 air core coil, 2.7mH ±2%, 0.9ohm, 1.00mm OFC-copper wire, Ø58xH28mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-2,70
L100-2,70
|
Mundorf
€10.01 IT/piece |
![]() |
Mundorf H50 ferrite core coil, 6.8mH ±3%, 1.31ohm, 0.50mm OFC-copper wire, Ø26xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H50-6,80
H50-6,80
|
Mundorf
€59.69 IT/piece |
![]() |
Mundorf BL100 air core coil, 12mH ±2%, 2.14ohm, 1.00mm OFC-copper wire, Ø77xH28mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |