Mundorf
€162.75 IT/piece |
Mundorf VN180 feron core coil, 15mH ±5%, 0.22ohm, 1.80mm OFC-copper wire, L106xH93xZ87mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |
Mundorf
€325.58 IT/piece |
Mundorf VLCU12 paper air copper foil coil, 8.2mH ±2%, 0.63ohm, 44x0.07mm OFC-copper wire, Ø126xH53mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU12-8,2
VLCU12-8,2
|
Mundorf
€29.85 IT/piece |
Mundorf BH71 aronit core coil, 39mH ±3%, 2.36ohm, 0.71mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€39.30 IT/piece |
Mundorf BH125 aronit core coil, 10mH ±3%, 0.48ohm, 1.40mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€325.58 IT/piece |
Mundorf VN300 feron core coil, 15mH ±5%, 0.1ohm, 3.00mm OFC-copper wire, L130xH115xZ97mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |
Mundorf
€89.85 IT/piece |
Mundorf VT140 feron core coil, 3.9mH ±3%, 0.23ohm, 1.40mm OFC-copper wire, L96xH69xZ77mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT140-3,9
VT140-3,9
|
Mundorf
€70.20 IT/piece |
Mundorf CFC14 air copper foil coil, 1.5mH ±2%, 0.33ohm, 28x0.07mm OFC-copper wire, Ø69xH34mm, with backed varnish wire
CFC14-1,50
CFC14-1,50
|
Mundorf
€59.85 IT/piece |
Mundorf VSCU12 feron core copper foil paper coil, 1mH ±3%, 0.05ohm, 1.98mm OFC-copper wire, L130xH38xZ38mm, with vaccum impregnated wire
VSCU12-1,0
VSCU12-1,0
|