Mundorf
€132.75 IT/piece |
Mundorf VN125 feron core coil, 33mH ±5%, 0.6ohm, 1.25mm OFC-copper wire, L96xH86xZ84mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |
Mundorf
€137.03 IT/piece |
Mundorf VL390 air core coil, 0.22mH ±2%, 0.03ohm, 3.90mm OFC-copper wire, L105xH79xZ93mm, with vaccum impregnated wire
VL390-0,22
VL390-0,22
|
Mundorf
€154.20 IT/piece |
Mundorf VLCU15 paper air copper foil coil, 8.2mH ±2%, 1.08ohm, 22x0.07mm OFC-copper wire, Ø115xH30mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU15-8,2
VLCU15-8,2
|
Mundorf
€22.20 IT/piece |
Mundorf P140 ferrite pipe core coil, 1mH ±3%, 0.18ohm, 1.40mm OFC-copper wire, Ø45xH30mm
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system.
P140-1,00
P140-1,00
|
Mundorf
€50.48 IT/piece |
Mundorf VL236 air core coil, 0.33mH ±2%, 0.07ohm, 2.36mm OFC-copper wire, Ø77xH28mm, with vaccum impregnated wire
VL236-0,33
VL236-0,33
|
Mundorf
€76.76 IT/piece |
Mundorf CFC18 air copper foil coil, 8.2mH ±2%, 1.8ohm, 11.5x0.07mm OFC-copper wire, Ø100xH18mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC18-8,2
CFC18-8,2
|
Mundorf
€15.30 IT/piece |
Mundorf BP71 ferrite pipe core coil, 3.9mH ±3%, 1.23ohm, 0.71mm OFC-copper wire, Ø40xH23mm, with backed varnish wire
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system. 99.99% OFC copper backed varnish wire, glass fiber reinforced plastic body, ferrite / aronit core.
BP71-3,9
BP71-3,9
|
Mundorf
€18.75 IT/piece |
Mundorf BH125 ferrite core coil, 1.5mH ±3%, 0.12ohm, 1.25mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH125-1,5
BH125-1,5
|