Mundorf
€171.30 IT/piece |
Mundorf CFC10 air copper foil coil, 0.82mH ±2%, 0.12ohm, 70x0.07mm OFC-copper wire, Ø67xH77mm, with backed varnish wire
CFC10-0,82
CFC10-0,82
|
Mundorf
€36.89 IT/piece |
iCore feron coil Mundorf BS140, 2.2mH ±3%, 0.15ohm, 84x28xH28mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.
BS140-2,20
BS140-2,20
|
Mundorf
€51.30 IT/piece |
Mundorf VL300 air core coil, 0.15mH ±2%, 0.03ohm, 3.00mm OFC-copper wire, Ø77xH28mm, with vaccum impregnated wire
VL300-0,15
VL300-0,15
|
Mundorf
€68.23 IT/piece |
Mundorf VLCU18 paper air copper foil coil, 5.6mH ±2%, 1.5ohm, 11.5x0.07mm OFC-copper wire, Ø96xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-5,6
VLCU18-5,6
|
Mundorf
€23.85 IT/piece |
Mundorf P100 ferrite pipe core coil, 4.7mH ±3%, 0.8ohm, 1.00mm OFC-copper wire, Ø45xH30mm
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system.
P100-4,7
P100-4,7
|
Mundorf
€42.75 IT/piece |
Mundorf BH140 aronit core coil, 6.8mH ±3%, 0.33ohm, 1.40mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH140-6,8
BH140-6,8
|
Mundorf
€304.20 IT/piece |
Mundorf VN390 feron core coil, 3.9mH ±5%, 0.03ohm, 3.90mm OFC-copper wire, L130xH115xZ97mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN390-3,9
VN390-3,9
|
Mundorf
€98.48 IT/piece |
Mundorf VT180 feron core coil, 2.7mH ±3%, 0.12ohm, 1.80mm OFC-copper wire, L96xH69xZ77mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT180-2,7
VT180-2,7
|