Mundorf
€90.75 IT/piece |
![]() |
Mundorf VN140 feron core coil, 5.6mH ±5%, 0.19ohm, 1.40mm OFC-copper wire, L84xH76xZ70mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN140-5,6
VN140-5,6
|
Mundorf
€462.75 IT/piece |
![]() |
Mundorf VL390 air core coil, 1.5mH ±2%, 0.08ohm, 3.90mm OFC-copper wire, L151xH106xZ120mm, with vaccum impregnated wire
VL390-1,50
VL390-1,50
|
Mundorf
€72.75 IT/piece |
![]() |
Mundorf VLCU12 paper air copper foil coil, 0.47mH ±2%, 0.13ohm, 44x0.07mm OFC-copper wire, Ø58xH53mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU12-0,47
VLCU12-0,47
|
Mundorf
€11.03 IT/piece |
![]() |
Mundorf BH71 ferrite core coil, 2.2mH ±3%, 0.37ohm, 0.71mm OFC-copper wire, Ø26xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH71-2,2
BH71-2,2
|
Mundorf
€35.03 IT/piece |
![]() |
Mundorf VSCU15 feron core copper foil paper coil, 0.27mH ±3%, 0.05ohm, 1.40mm OFC-copper wire, L84xH27xZ27mm, with vaccum impregnated wire
VSCU15-0,27
VSCU15-0,27
|
Mundorf
€239.85 IT/piece |
![]() |
Mundorf VT300 feron core coil, 4.7mH ±3%, 0.08ohm, 3.00mm OFC-copper wire, L130xH100xZ106mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT300-4,7
VT300-4,7
|
Mundorf
€274.20 IT/piece |
![]() |
Mundorf CFC10 air copper foil coil, 2.2mH ±2%, 0.21ohm, 70x0.07mm OFC-copper wire, Ø88xH77mm, with backed varnish wire
CFC10-2,20
CFC10-2,20
|
Mundorf
€145.58 IT/piece |
![]() |
Mundorf VL300 air core coil, 1mH ±2%, 0.09ohm, 3.00mm OFC-copper wire, L105xH79xZ93mm, with vaccum impregnated wire
VL300-1,00
VL300-1,00
|