Mundorf
€214.20 IT/piece |
Mundorf VSCU12 feron core copper foil paper coil, 12mH ±3%, 0.32ohm, 1.98mm OFC-copper wire, L130xH88xZ88mm, with vaccum impregnated wire
|
Mundorf
€92.48 IT/piece |
Mundorf VN140 feron core coil, 6.8mH ±5%, 0.21ohm, 1.40mm OFC-copper wire, L84xH76xZ70mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN140-6,8
VN140-6,8
|
Mundorf
€514.20 IT/piece |
Mundorf VL390 air core coil, 1.8mH ±2%, 0.09ohm, 3.90mm OFC-copper wire, L151xH106xZ120mm, with vaccum impregnated wire
VL390-1,80
VL390-1,80
|
Mundorf
€81.30 IT/piece |
Mundorf VLCU12 paper air copper foil coil, 0.56mH ±2%, 0.14ohm, 44x0.07mm OFC-copper wire, Ø60xH53mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU12-0,56
VLCU12-0,56
|
Mundorf
€11.55 IT/piece |
Mundorf BH71 ferrite core coil, 2.7mH ±3%, 0.43ohm, 0.71mm OFC-copper wire, Ø26xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH71-2,7
BH71-2,7
|
Mundorf
€257.03 IT/piece |
Mundorf VT300 feron core coil, 5.6mH ±3%, 0.09ohm, 3.00mm OFC-copper wire, L130xH100xZ106mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT300-5,6
VT300-5,6
|
Mundorf
€299.85 IT/piece |
Mundorf CFC10 air copper foil coil, 2.7mH ±2%, 0.23ohm, 70x0.07mm OFC-copper wire, Ø93xH77mm, with backed varnish wire
CFC10-2,70
CFC10-2,70
|
Mundorf
€188.48 IT/piece |
Mundorf VL300 air core coil, 1.5mH ±2%, 0.12ohm, 3.00mm OFC-copper wire, L105xH79xZ93mm, with vaccum impregnated wire
VL300-1,50
VL300-1,50
|