Mundorf
€154.20 IT/piece |
Mundorf VL390 air core coil, 0.27mH ±2%, 0.03ohm, 3.90mm OFC-copper wire, L105xH79xZ93mm, with vaccum impregnated wire
VL390-0,27
VL390-0,27
|
Mundorf
€171.30 IT/piece |
Mundorf VLCU15 paper air copper foil coil, 10mH ±2%, 1.23ohm, 22x0.07mm OFC-copper wire, Ø127xH30mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf. |
Mundorf
€17.03 IT/piece |
Mundorf P100 ferrite pipe core coil, 2.2mH ±3%, 0.47ohm, 1.00mm OFC-copper wire, Ø45xH30mm
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system.
P100-2,2
P100-2,2
|
Mundorf
€214.20 IT/piece |
Mundorf VN390 feron core coil, 1.8mH ±5%, 0.02ohm, 3.90mm OFC-copper wire, L106xH93xZ87mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN390-1,8
VN390-1,8
|
Mundorf
€75.30 IT/piece |
Mundorf VT180 feron core coil, 1.2mH ±3%, 0.08ohm, 1.80mm OFC-copper wire, L84xH60xZ60mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT180-1,2
VT180-1,2
|
Mundorf
€154.20 IT/piece |
Mundorf CFC14 air copper foil coil, 6.8mH ±2%, 0.78ohm, 28x0.07mm OFC-copper wire, Ø101xH34mm, with backed varnish wire
CFC14-6,80
CFC14-6,80
|
Mundorf
€17.58 IT/piece |
Mundorf BH100 ferrite core coil, 3.3mH ±3%, 0.27ohm, 1.00mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH100-3,3
BH100-3,3
|
Mundorf
€72.75 IT/piece |
Mundorf VSCU12 feron core copper foil paper coil, 1.8mH ±3%, 0.08ohm, 1.98mm OFC-copper wire, L130xH46xZ46mm, with vaccum impregnated wire
VSCU12-1,8
VSCU12-1,8
|