Mundorf
€7.71 IT/piece |
CFC16 0.082 mH
OCF copper foil coil Mundorf, CFC16 0.082 mH
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation. |
Mundorf
€18.41 IT/piece |
Mundorf H100 ferrite core coil, 5.6mH ±3%, 0.39ohm, 1.00mm OFC-copper wire, Ø40xH37mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H100-5,6
H100-5,6
|
Mundorf
€36.06 IT/piece |
Mundorf H125 aronit core coil, 10mH ±3%, 0.48ohm, 1.40mm OFC-copper wire, Ø51xH51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€59.69 IT/piece |
Mundorf L125 air core coil, 6.8mH ±2%, 1.19ohm, 1.25mm OFC-copper wire, Ø70xH59mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L125-6,80
L125-6,80
|
Mundorf
€8.12 IT/piece |
Mundorf L50 air core coil, 1.8mH ±2%, 2.26ohm, 0.50mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-1,80
L50-1,80
|
Mundorf
€137.03 IT/piece |
Mundorf VN300 feron core coil, 1.5mH ±5%, 0.02ohm, 3.00mm OFC-copper wire, L96xH86xZ84mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN300-1,5
VN300-1,5
|
Mundorf
€15.29 IT/piece |
Mundorf L125 air core coil, 0.56mH ±2%, 0.24ohm, 1.25mm OFC-copper wire, Ø58xH18mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L125-0,56
L125-0,56
|
Mundorf
€22.12 IT/piece |
Mundorf BL100 air core coil, 1.8mH ±2%, 0.7ohm, 1.00mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-1,80
BL100-1,80
|