PHL Audio |
3040 |
3040-8 |
Cone driver |
Sold by piece |
|
Brand PHL Audio |
Model 3040 |
TLHP code 3040-8 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 14 weeksMidrange transducer dedicated to the reproduction of 150-5000Hz frequencies. Equiped with a progressive wave diaphragm for precise transcription of the mir-range band. Usable either for direct radiation in small volumes from 4L to 6L or for horn loaded application.
General |
|
Product type | Cone driver |
Brand | PHL Audio |
Reference | 3040 |
Informations |
|
Product manufacturer range | Standard |
Nominal impedance | 8 ohm |
Dimensional category | 10 inch, 11 inch |
Frequency coverage type | Midrange |
Manufacturer sensitivity | 97 dB |
Calculated sensitivity | 96.64 dB |
Nominal power handling | 160 W |
Max power handling | 320 W |
Bandwidth | 150÷5000 Hz |
Fundamental parameters |
|
Sd | 377 cm² |
Mms | 30 gr |
Cms | 100 µm/N |
Rms | 4.5 kg/s |
Le | 0.48 mH |
Re | 6 ohm |
BL | 14.25 T.m |
Small signal parameters |
|
Fs | 91 Hz |
Qes | 0.51 |
Qms | 3.82 |
Qts | 0.45 |
Vas | 20.39 L |
Datas |
|
Xmax | ±2 mm |
Calculated Xmax | ±3.6667 mm |
Xvar, Xmech, Xlim | ±18 mm |
EBP | 178 Hz |
Zmin | 6.6 ohm |
Fs / Qts | 202 Hz |
Vas * Qts² | 4.13 L |
Efficiency | 2.98 % |
Calculated efficiency | 2.9 % |
Air volume occupied by the driver | 1.1 L |
Demodulation ring | Yes |
Dimensions |
|
Voice coil diameter | 2 inch |
Winding depth | 10 mm |
Gap height | 8 mm |
External dimensions | 254.5 | 283.5 mm |
Baffle cutout diameter | 229 mm |
Depth | 120 mm |
Front thickness | 11 mm |
Depth after front | 109 mm |
Diamètre aimant (mm) | 158 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Ferrite |
Basket masterial | Zamak |
Winding material | CCAR (Flat ribbon copper-clad aluminium wire) |
Voice coil former | Glass fiber |
Surround shape | Double roll |
Surround material | Cloth |
Dome material | Carbon fiber |
Cone shape | Exponential |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.