Visaton |
TIW 200 XS - 8 OHM |
TIW 200 XS-8 |
1340 |
Cone driver |
Sold by piece |
|
Brand Visaton |
Model TIW 200 XS - 8 OHM |
TLHP code TIW 200 XS-8 |
Manufacturer code 1340 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
This product is in the process of supply to be in stock.
Reserved on order
Next TLHP reception estimated between May 20, 2024 and May 27, 2024
20 cm (8") High-end woofer specially for use as a small subwoofer. The extra-wide elastic cone, the long voice coil and particularly large magnet arrangement give this speaker extremely long excursion.
Thanks to the multiple venting of the voice coil (pole piece hole, holes in the pole piece plate, cutouts in the aluminium diecast cone to vent the centring unit from behind) losses and flow noise are minimised. The capton voice coil carrier and the long voice coil enable the driver to withstand considerable loads.
The diaphragm is a sandwich construction made up of layers of fibreglass and polyester fabric which makes it particularly rigid and low in resonance.
These design features result in high level accuracy and excellent low-range bass imaging even in smaller cabinets.
General |
|
Product type | Cone driver |
Brand | Visaton |
Reference | TIW 200 XS - 8 OHM |
Product code | 1340 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 8.5 inch |
Frequency coverage type | Sub, Low, Midbass |
Manufacturer sensitivity | 84 dB |
Calculated sensitivity | 86.29 dB |
Nominal power handling | 120 W |
Max power handling | 180 W |
Bandwidth | 30÷7500 Hz |
Fundamental parameters |
|
Sd | 206 cm² |
Mms | 33 gr |
Le | 1.6 mH |
Re | 6 ohm |
BL | 8.51 T.m |
Small signal parameters |
|
Fs | 30 Hz |
Qes | 0.5 |
Qms | 5.19 |
Qts | 0.46 |
Vas | 51.5 L |
Datas |
|
Flux density | 1.1 T |
Xmax | ±12.5 mm |
Calculated Xmax | ±13.6667 mm |
EBP | 60 Hz |
Fs / Qts | 65 Hz |
Vas * Qts² | 10.9 L |
Calculated efficiency | 0.27 % |
Weight | ~3.5 kg |
Dimensions |
|
Voice coil diameter | 1.5 inch |
Winding depth | 30 mm |
Gap height | 8 mm |
Outside diameter | 222 mm |
Baffle cutout diameter | 190 mm |
Front thickness | 6 mm |
Depth after front | 108 mm |
Diamètre aimant (mm) | 115 mm |
Shape & Materials |
|
Magnet type | Ferrite |
Basket masterial | Aluminium |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.