Mundorf
€25.58 IT/piece |
Mundorf BH180 aronit core coil, 0.47mH ±3%, 0.05ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-0,47
BH180-0,47
|
Mundorf
€26.48 IT/piece |
Mundorf BH180 aronit core coil, 0.56mH ±3%, 0.05ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-0,56
BH180-0,56
|
Mundorf
€27.30 IT/piece |
Mundorf BH180 aronit core coil, 0.68mH ±3%, 0.06ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-0,68
BH180-0,68
|
Mundorf
€29.03 IT/piece |
Mundorf BH180 aronit core coil, 0.82mH ±3%, 0.06ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-0,82
BH180-0,82
|
Mundorf
€93.84 IT/piece |
Mundorf BL140 air core coil, 8.2mH ±2%, 1.1ohm, 1.40mm OFC-copper wire, Ø70xH59mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-8,20
BL140-8,20
|
Mundorf
€42.61 IT/piece |
Mundorf BL140 air core coil, 1.8mH ±2%, 0.4ohm, 1.40mm OFC-copper wire, Ø70xH29mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-1,80
BL140-1,80
|
Mundorf
€22.12 IT/piece |
Mundorf BL100 air core coil, 1.8mH ±2%, 0.7ohm, 1.00mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-1,80
BL100-1,80
|
Mundorf
€25.53 IT/piece |
Mundorf BL100 air core coil, 2.7mH ±2%, 0.9ohm, 1.00mm OFC-copper wire, Ø58xH28mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-2,70
BL100-2,70
|