PHL Audio |
3491 |
3491-14-6 |
Coaxial driver with one entry |
Sold by piece |
|
Brand PHL Audio |
Model 3491 |
TLHP code 3491-14-6 |
||
Product type Coaxial driver with one entry |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 14 weeks
Noiseless natural convection Intercooling System
High compliance double half-roll Fabric Surround for low Fs
Dual side coated diaphragm
Coaxial apparatus "-14" with rear flange (Max diameter for HF driver = 136.0 mm)
The PHL 3491 is a variante of PHL 3490 with a just a little more mobil mass on the cone, the speaker 3491 is a 10" coaxial (impedance 6 ohm) equipped with a ferrite magnet system, 300w AES power handling, it gives a high SPL (95dB/1w/1m) and a large frequency range (60 to 3000 Hz). This coaxial driver PHL 3491 is provided without the high frequency driver, then you can install the 1.0" troath compression driver you want.
General |
|
Product type | Coaxial driver with one entry |
Brand | PHL Audio |
Reference | 3491 |
Informations |
|
Product manufacturer range | Standard |
Nominal impedance | 6 ohm |
Dimensional category | 10 inch, 11 inch |
Manufacturer sensitivity | 94 dB |
Calculated sensitivity | 93.6 dB |
Nominal power handling | 250 W |
Max power handling | 500 W |
Exit dimension | 1.0 inch |
Fundamental parameters |
|
Sd | 324 cm² |
Mms | 47.5 gr |
Cms | 190 µm/N |
Rms | 2.6 kg/s |
Le | 0.49 mH |
Re | 4.2 ohm |
BL | 15.5 T.m |
Small signal parameters |
|
Fs | 53 Hz |
Qes | 0.28 |
Qms | 6.08 |
Qts | 0.26 |
Vas | 28.19 L |
Datas |
|
Xmax | ±6 mm |
Calculated Xmax | ±7.1667 mm |
Xvar, Xmech, Xlim | ±12 mm |
EBP | 189 Hz |
Zmin | 4.4 ohm |
Fs / Qts | 204 Hz |
Vas * Qts² | 1.91 L |
Efficiency | 1.48 % |
Calculated efficiency | 1.44 % |
Weight | ~1.5 kg |
Air volume occupied by the driver | 1.5 L |
Demodulation ring | Yes |
Recommended load volume | 25 L |
Fréquence d'accord liée à la charge | 56 Hz |
Horn technology | Speaker cone |
Dimensions |
|
Voice coil diameter | 2.5 inch |
Winding depth | 17 mm |
Gap height | 8 mm |
External dimensions | 254.5 | 283.5 mm |
Baffle cutout diameter | 229 mm |
Depth | 120 mm |
Front thickness | 11 mm |
Depth after front | 109 mm |
Diamètre aimant (mm) | 172.4 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Ferrite |
Basket masterial | Zamak |
Voice coil former | Glass fiber |
Surround shape | Double roll |
Surround material | Cloth |
Dome material | Cloth |
Cone shape | Exponential |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.