SB Acoustics |
SATORI_MT19CP-8+4 |
Cone driver |
Sold by piece |
|
Brand SB Acoustics |
TLHP code SATORI_MT19CP-8+4 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 4 weeks
General |
|
Product type | Cone driver |
Brand | SB Acoustics |
Informations |
|
Product manufacturer range | Satori |
Nominal impedance | 8+4 ohm |
Dimensional category | 7.5 inch |
Frequency coverage type | Sub, Low |
Manufacturer sensitivity | 90 | 90 dB |
Calculated sensitivity | 91.36 dB |
Nominal power handling | 60 | 60 W |
Recommended min cutoff frequency | 2400 Hz |
Fundamental parameters |
|
Sd | 152 cm² |
Mms | 12.1 gr |
Cms | 1130 µm/N |
Rms | 0.5 kg/s |
Le | 0.12 mH |
Re | 6.5 | 3.7 ohm |
BL | 8.05 T.m |
Small signal parameters |
|
Fs | 43 | 1200 Hz |
Qes | 0.33 |
Qms | 6.54 |
Qts | 0.31 |
Vas | 37.1 L |
Datas |
|
Flux density | 1.1 | 1.2 T |
Xmax | ±3.6 mm |
Calculated Xmax | ±5.6 mm |
EBP | 130 Hz |
Fs / Qts | 139 Hz |
Vas * Qts² | 3.57 L |
Calculated efficiency | 0.86 % |
Weight | ~1.6 kg |
Dimensions |
|
Voice coil diameter | 1.52 | 1 inch |
Winding depth | 13.2 | 1.3 mm |
Gap height | 6 | 2.5 mm |
Outside diameter | 187 mm |
Baffle cutout diameter | 161.5 mm |
Depth | 116 mm |
Front thickness | 8 mm |
Depth after front | 108 mm |
Diamètre aimant (mm) | 75 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
Basket masterial | Aluminium |
Winding material | CCAW (Copper-clad aluminium wire) |
Voice coil former | Glass fiber |
Surround shape | Triple roll |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.