Compression driver
Faital Pro
€625.71 IT/piece |
|
HF1460 8 ohm
Compression driver FaitalPRO HF1460, 8 ohm, 1.4 inch
When carbon fiber meets high frequency.
00864360
00864360
|
Celestion
€45.05 IT/piece |
|
CDX1-1445 8 ohm
Compression driver Celestion CDX1-1445, 16 ohm, throat diameter 1 inch
T5823
T5823
|
Faital Pro
€91.09 IT/piece |
|
HF102 8 ohm
Compression driver FaitalPRO HF102, 8 ohm, 1 inch
00253937
00253937
|
Peerless
€22.83 IT/piece |
|
8 ohm
Compression driver Peerless DFL-2525R00-08, 8 ohm, 1-inch throat
This 1inch diaphragm inch exit compression driver is a cost effective solution for use in professional sound reinforcement systems. The pure titanium diaphragm ensures solid and controlled vibration to the highest frequencies. The phase plug was studied extensively to optimize the HF level, and ensures a wide smooth response characteristic. The use of high quality ferrofluid combined with extensive verification testing has resulted in a transducer which is extremely reliable. |
DAS
€331.48 IT/piece |
|
K-8 16 ohm
Compression driver DAS K-8, 16 ohm, 2.0 inch
The D.A.S. K-8 is a 2" diameter exit ceramic magnet high frequency compression driver with 100 mm (4") diameter voice coil. A pure titanium diaphragm is utilized, avoiding dome fracture due to mechanical fatigue, common in other diaphragm materials. The copper-clad aluminium voice coil is edge-wound and thermal bonded to a Kapton former, which ensures resistance to high temperatures. The 4-slit phase plug has been computer designed for coherent sound pressure summing at the throat. Manufactured out of aluminium, it acts as a heat sink for the voice coil, minimizing power compression and increasing power handling.
K-8
K-8
|
Beyma
€246.29 IT/piece |
|
SMC65Nd 8 ohm
Compression driver Beyma SMC-65Nd, 8 ohm, 1.4-inch throat
1SMC65ND8R
1SMC65ND8R
|
Faital Pro
€284.12 IT/piece |
|
HF143 16 ohm
Compression driver Faital PRO HF143, 16 ohm, 1.4 inch
00744247
00744247
|
Eighteen Sound
€113.66 IT/piece |
|
ND1030 8 ohm
18 Sound ND1030 compression driver, 8 ohm, 1 inch exit
The ND1030 1-inch exit high frequency compression driver has been designed for use in high quality two-way audio systems. The ND1030 exhibits a constant slope response from 1.5kHz to 18kHz with a uniform and smooth roll-off. With a 900Hz free air resonance frequency, the ND1030 can easily be cut-off at 1800Hz and is capable of 60W continuous power handling with a 1800Hz pink-noise signal, and a 6dB crest factor with a minimum 12dB/oct crossover slope. Equipped with unique Phase Plug architecture, the ND1030 has been designed to give a smooth coherent wavefront at the horn entrance in the whole working frequency range, as well as high level manufacturing consistency. The phase plug design with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The ND1030 titanium diaphragm assembly, with its ellipsoidal suspension shape, exhibits a constant slope response from 1kHz to 18kHz with uniform smooth roll-off behavior. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable for use in higher moisture content environments. By careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly capable of reaching 18KGauss in the gap within a compact and lightweight structure.
DRV101030TI08NA - 0421T8M800
DRV101030TI08NA - 0421T8M800
|
