Eighteen Sound |
15LW2400 |
15LW2400-4 |
ALT152400WF04FA - 0221542400 |
Cone driver |
Sold by piece |
|
Brand Eighteen Sound |
Model 15LW2400 |
TLHP code 15LW2400-4 |
Manufacturer code ALT152400WF04FA - 0221542400 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
This product is in the process of supply to be in stock.
Reserved on order
Indicative average supply lead time: 11 weeks
The 15LW2400 has been developed as an evolution of the 15LW1401 low frequency transducer, setting a new industry standard in 15" (380 mm) ferrite high performance transducers.
The speaker has been designed for use as a low bass or sub-woofer component in a compact cabinet (60 - 130 lt) reflex configuration, providing clean, linear, undistorted low frequency reproduction at very high power levels.
The high excursion capabilities of the Double Silicon Spider (DSS) enable the 15LW2400 to achieve high levels of linear travel and maintain full control of the moving mass. The fiberglass fiber reinforced, straight-sided ribbed cone assures smooth response with high internal damping.
The 100 mm Ø copper voice coil employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. The weight of the windings are evenly distributed, providing a uniform motive drive.
The already low distortion and sound quality of 15LW2400 has been further improved by the Double Demodulation Rings (DDR) designed to dramatically reduce the intermodulation and harmonic distortion whilst improving the transient response.
Excellent heat dissipation has been achieved by incorporating air channels between the basket and the top plate of the magnet. Further ventilation is provided using air vents in the back plate that direct air into the lower part of the voice coil gap. In order to furtherly increase power handling and reduce power compression figure, 15LW2400 uses the same voice coil ventilation technology developed for our flagship 9000 neodymium transducer series. A low density material air diffractor is placed into the backplate acting as a cooling system, increasing power handling capability and lowering the power compression figure. As a final result the transducer shows 1 dB reduction in full power power compression value if compared to 15LW1401, and a program power handling value of 2400 Watt.
10% reduction in weight have been obtained optimizing the magnetic structure through advanced FEA CAD simulation tools.
The 15LW2400 ability to perform properly under inclement weather conditions has been achieved using an exclusive cellulose treatment which gives water repellent properties to both sides of the cone. In addition, an epoxy coating is applied to metal plates in order to resist against the corrosive effects of salts and oxidization.
97 dB SPL 1W / 1m average sensitivity
100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
2400 W program power handling
Double Silicon Spider (DSS) for improved excursion control and linearity
Double Demodulating Rings (DDR) for lower distortion
Unlimited life lead wire construction
Improved heat dissipation via multi-cell air diffractor and multiple backplate vents
Weather protected fiberglass reinforced cellulose cone
Suitable for 60 to 130 liters low bass or subwoofer applications
General |
|
Product type | Cone driver |
Brand | Eighteen Sound |
Reference | 15LW2400 |
Product code | ALT152400WF04FA - 0221542400 |
Informations |
|
Nominal impedance | 4 ohm |
Dimensional category | 15.5 inch |
Frequency coverage type | Sub, Low, Midbass |
Manufacturer sensitivity | 97 dB |
Calculated sensitivity | 96.8 dB |
Nominal power handling | 1200 W |
Max power handling | 2400 W |
Bandwidth | 40÷2200 Hz |
Fundamental parameters |
|
Sd | 850 cm² |
Mms | 135 gr |
Cms | 164 µm/N |
Le | 0.79 mH |
Re | 2.7 ohm |
BL | 18 T.m |
Small signal parameters |
|
Fs | 34 Hz |
Qes | 0.24 |
Qms | 4.2 |
Qts | 0.23 |
Vas | 191 L |
Datas |
|
Xmax | ±9.5 mm |
EBP | 142 Hz |
Zmin | 4.2 ohm |
Fs / Qts | 148 Hz |
Vas * Qts² | 10.11 L |
Calculated efficiency | 3.01 % |
Weight | ~11.2 kg |
Dimensions |
|
Voice coil diameter | 4 inch |
Outside diameter | 393 mm |
Baffle cutout diameter | 354 mm |
Depth | 181 mm |
Front thickness | 12 mm |
Depth after front | 169 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.