PHL Audio |
1230 |
1230-16 |
Cone driver |
Sold by piece |
|
Brand PHL Audio |
Model 1230 |
TLHP code 1230-16 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 14 weeks
Architecture highlights :
- High excursion S roll rubber surround
- High definition ultra light CCAR Voice coil
- Natural convection Intercooler System
- Both side coated curvilinear cone
These 6.5"ultimate sounding quality Bass-Midrange drivers have been designed to match advanced studio monitoring requirements for proximity monitoring.
The exceptional sound accuracy of these units results from a careful design using A/B listening tests to select technological solutions, which authorizes their use up to 2.5kHz without any compromise, and up to 4.0kHz with full preservation of dynamic behavior (Compromise is on directivity pattern only). Optimum Bass-Reflex loading is situated between 12L and 16L tuned from 45Hz to 40Hz.
General |
|
Product type | Cone driver |
Brand | PHL Audio |
Reference | 1230 |
Informations |
|
Product manufacturer range | Standard |
Nominal impedance | 16 ohm |
Dimensional category | 6.5 inch, 7.5 inch |
Frequency coverage type | Low, Midbass, Midrange |
Manufacturer sensitivity | 92 dB |
Calculated sensitivity | 91.88 dB |
Nominal power handling | 100 W |
Max power handling | 200 W |
Bandwidth | 50÷4000 Hz |
Fundamental parameters |
|
Sd | 143 cm² |
Mms | 11.7 gr |
Cms | 750 µm/N |
Rms | 1.1 kg/s |
Le | 0.46 mH |
Re | 12.1 ohm |
BL | 11.9 T.m |
Small signal parameters |
|
Fs | 54 Hz |
Qes | 0.34 |
Qms | 3.59 |
Qts | 0.31 |
Vas | 21.77 L |
Datas |
|
Xmax | ±4.5 mm |
Calculated Xmax | ±5 mm |
Xvar, Xmech, Xlim | ±8 mm |
EBP | 159 Hz |
Zmin | 13.5 ohm |
Fs / Qts | 174 Hz |
Vas * Qts² | 2.1 L |
Efficiency | 0.98 % |
Calculated efficiency | 0.97 % |
Air volume occupied by the driver | 0.5 L |
Demodulation ring | Yes |
Recommended load volume | 16 L |
Fréquence d'accord liée à la charge | 53 Hz |
Dimensions |
|
Voice coil diameter | 1.5 inch |
Winding depth | 12 mm |
Gap height | 6 mm |
External dimensions | 162.5 | 187.5 mm |
Baffle cutout diameter | 146 mm |
Depth | 76.5 mm |
Front thickness | 8 mm |
Depth after front | 68.5 mm |
Diamètre aimant (mm) | 117.5 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Ferrite |
Basket masterial | Zamak |
Winding material | CCAR (Flat ribbon copper-clad aluminium wire) |
Voice coil former | Glass fiber |
Surround material | Rubber |
Dome material | Carbon fiber |
Cone shape | Exponential |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.