Oberton |
10CX |
10CX-8+16 |
12110F0108 |
Coaxial driver with two entries |
Sold by piece |
|
Brand Oberton |
Model 10CX |
TLHP code 10CX-8+16 |
Manufacturer code 12110F0108 |
||
Product type Coaxial driver with two entries |
Sales packaging Sold by Piece |
|
The 10CX is a 10" / 1" coaxial transducer designed for use in compact reflex enclosures with a nominal dispersion of 90 degrees.Compact reflex boxes.
The low profile, smooth curvilinear LF cone provides smooth response within its intended frequency range and water prove protective coating, allowing application in a wide range of environments. The state-of-the-art 51 mm (2 in) LF voice coil has glassfiber former, which together with high temperature resistant resin ensure high reliability by high power.
A double aluminium demodulating rings reduce distortion and inductance and improve transient response.
The special cone made of cellulose with carbon fibers improves waterfall response.
The 1" exit compression driver adopted is our D2544 model.
The HF driver diaphragm assembly, using triple layer polyester dome this together with phasing plug improve linearity of frequency response in high end.
Because of design with single magnet assembly the speaker has light weight and compact size.
General |
|
Product type | Coaxial driver with two entries |
Brand | Oberton |
Reference | 10CX |
Product code | 12110F0108 |
Informations |
|
Nominal impedance | 8+16 ohm |
Dimensional category | 10.5 inch |
Manufacturer sensitivity | 96 dB |
Calculated sensitivity | 95.26 dB |
Nominal power handling | 200 | 40 W |
Max power handling | 400 | 80 W |
Bandwidth | 65÷20000 Hz |
Exit dimension | 1.0 inch |
Fundamental parameters |
|
Sd | 297 cm² |
Mms | 27.25 gr |
Cms | 225.4 µm/N |
Le | 0.68 mH |
Re | 5.2 | 10.53 ohm |
BL | 12.05 T.m |
Small signal parameters |
|
Fs | 64.22 Hz |
Qes | 0.39 |
Qms | 11.11 |
Qts | 0.38 |
Vas | 32.32 L |
Datas |
|
Flux density | 0.91 | 1.9 T |
Xmax | ±4.25 mm |
Calculated Xmax | ±5 mm |
EBP | 165 Hz |
Zmin | 6.24 ohm |
Zmin N°2 | 12.59 ohm |
Fs / Qts | 169 Hz |
Vas * Qts² | 4.67 L |
Calculated efficiency | 2.11 % |
Dispersion | 90° x 90° |
Horn technology | Speaker cone |
Dimensions |
|
Voice coil diameter | 2 | 1.75 inch |
Winding depth | 13 mm |
Gap height | 9 mm |
Outside diameter | 263 mm |
Baffle cutout diameter | 225 mm |
Depth | 141 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Aluminium |
Surround material | Cloth |
Winding material | CCAW (Copper-clad aluminium wire) |
Diaphragm material | Polyester |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.