Mundorf BS100 feron core coil, 2.2mH ±3%, 0.26ohm, 1mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 66x22xH22mm
|
Mundorf |
BS100-2.2 |
Coil |
|
|
Brand Mundorf |
TLHP code BS100-2.2 |
|
|
Product type Coil |
|
|
-
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.
This series of coils is particularly suitable for subwoofer filtering when looking for a good size / inductance ratio, a low DRC and an affordable price. The BS series, completely redesigned in 2010, replaced the famous Mundorf i and Bi series.
Regarding the manufacturing process, once the coil is wound, it is heated by means of an electric pulse melting the layer of varnish. When cooling, the individual windings are firmly bound together by the baked varnish and are thus prevented from vibrating and the original signal remains intact.
General |
|
| Product type | Coil |
| Brand | Mundorf |
Informations |
|
| Inductance | 2.2 mH (min 2.13, max 2.27) |
| Coil tolerance | 3% |
| Coil range | BS |
| Wire | Ø 1.0 mm |
| Body code | S66 |
| Rdc | 0.26 ohm |
| Backed varnish | Yes |
Datas |
|
| Weight | ~0.19 kg |
Dimensions |
|
| Height | 2.2 mm |
| Width | 2.2 mm |
| Length | 7.6 mm |
Question about Mundorf BS100-2.2
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Mundorf BS100-2.2
This series of coils is particularly suitable for subwoofer filtering when looking for a good size / inductance ratio, a low DRC and an affordable price. The BS series, completely redesigned in 2010, replaced the famous Mundorf i and Bi series.
Regarding the manufacturing process, once the coil is wound, it is heated by means of an electric pulse melting the layer of varnish. When cooling, the individual windings are firmly bound together by the baked varnish and are thus prevented from vibrating and the original signal remains intact.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Dimensions
