Search page for coils with filtering by capacitance in µF and price. Select filters to bring out the coils corresponding to your search.
Mundorf
€58.73 IT/piece |
iCore feron coil Mundorf BS140, 10mH ±3%, 0.35ohm, 130x35xH35mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Monacor
€8.64 IT/piece |
Air core coil Monacor LSIP-47/1, 0.47mH, 0.35ohm, Ø48 x 19mm
Self à air Monacor LSIP-47/1, inductance 0.47 mH conducteur ø 1.0 mm, puissance 150 WRMS, Rdc 0.35 ?, dimensions ø 48 mm x 19 mm |
Mundorf
€34.08 IT/piece |
Mundorf LL60 litz wire air core coil, 0.39mH ±2%, 0.15ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø28xL58mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-0,39
LL60-0,39
|
Mundorf
€67.20 IT/piece |
Air core coil Mundorf L300, 0.68mH ±2%, 0.07ohm, 105x93xH79mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L300-0,68
L300-0,68
|
Mundorf
€22.62 IT/piece |
Mundorf H71 ferrite core coil, 33mH ±3%, 1.93ohm, 0.71mm OFC-copper wire, Ø40xH37mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€58.78 IT/piece |
Air core coil Mundorf L200, 2.2mH ±2%, 0.28ohm, 89x76xH61mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L200-2,20
L200-2,20
|
Mundorf
€20.42 IT/piece |
Mundorf VLCU18 paper air copper foil coil, 0.33mH ±2%, 0.25ohm, 11.5x0.07mm OFC-copper wire, Ø44xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-0,33
VLCU18-0,33
|
Mundorf
€11.87 IT/piece |
Mundorf BL125 air core coil, 0.18mH ±2%, 0.13ohm, 1.25mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-0,18
BL125-0,18
|