Eighteen Sound |
NSD1424BTN |
NSD1424BTN-8 |
DRV141424TN08NA - 0422N8M900 |
Compression driver |
|
Brand Eighteen Sound |
Model NSD1424BTN |
TLHP code NSD1424BTN-8 |
Manufacturer code DRV141424TN08NA - 0422N8M900 |
|
Product type Compression driver |
|
The NSD1424BTN 1.4" exit neodymium high frequency compression driver has been designed for high level sound systems application.
A further innovation in the NSD1424BTN, when compared to the already excellent performances of the ND1424BT, is the nitride titanium material treatment (True Piston Motion - TPM technology) developed after extensive research by Eighteen Sound. The titanium nitride coating dramatically improves stiffness with obvious benefits in transient and intermodulation distortion response. With its very high value of elasticity modulus (six times higher than titanium and two times higher than beryllium), the nitride thin film is capable of doubling the diaphragm overall stiffness. The piston frequency range motion extends frequency by 25%, showing a predictable, ideal frequency response decay and avoiding top-end spurious resonances.
A proprietary treated Nomex bended former edge-wound aluminum 60mm voice coil completes diaphragm assembly. It has been made joining the proprietary treated Nomex former directly to the titanium dome through its upper bend edge. In comparison with usual straight former joint, the driver design assures extended frequency energy transfer for improved response linearity and unparallel reliability. This feature allows to keep proper motion control of the dome in real working conditions. Thanks to its physical properties, the proprietary treated Nomex former shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. Moreover, this material is suitable to work also in higher moisture contents environments.
Equipped with Proprietary Phase Plug 3P architecture, the NSD1424BTN has been designed to give smooth coherent wavefront in the horn entrance in all working frequency range and high level manufacturing consistency. The phase plug with its short openings and high flare rate value assures low distortion and remarkable improvements in mid-high frequency reproduction.
Through careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly able to reach 19KGauss in the gap in compact and lightweight structure. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion.
The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading.
Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover that allows to obtain a lower power compression value.
110 dB 1W / 1m average sensitivity
140 W program power handling
1.4 inches exit throat
64mm (2,4 in) edgewound aluminum voice coil
True Piston Motion TiN coated titanium diaphragm
Proprietary phase plug design
High grade neodymium magnetic structure
Excellent thermal exchange
General |
|
Product type | Compression driver |
Brand | Eighteen Sound |
Reference | NSD1424BTN |
Product code | DRV141424TN08NA - 0422N8M900 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 4.5 inch |
Manufacturer sensitivity | 110 dB |
Nominal power handling | 70 W |
Max power handling | 140 W |
Bandwidth | 800÷20000 Hz |
Recommended min cutoff frequency | 1200 Hz |
Exit dimension | 1.4 inch |
Datas |
|
Flux density | 1.9 T |
Zmin | 8 ohm |
Dimensions |
|
Voice coil diameter | 2.4 inch |
Outside diameter | 116 mm |
Depth | 54 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Neodymium |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.