Speaker Beyma 18LEX1000Fe, 8 ohm, 18 inch
|
Beyma |
18LEX1600Fe |
18LEX1000FE-8 |
118LEX10FE8 |
Cone driver |
|
|
Brand Beyma |
Model 18LEX1600Fe |
TLHP code 18LEX1000FE-8 |
Manufacturer code 118LEX10FE8 |
|
|
Product type Cone driver |
|
|||
Alternative suggestion
Unavailable
-
Optimized for direct radiation and band-pass subwoofer applications
High power handling and low distortion 18" subwoofer
Exclusive Malt Cross® Technology Cooling System
Low power compression losses
High sensitivity: 98 dB (1W / 1m)
FEA optimized neodymium magnetic circuit
Ultra low air noise
Optimized linear behaviour
Waterproof cone with treatment for both sides
3.5" DUO in/out copper voice coil
Extended controlled displacement: Xmax ± 11 mm
51 mm peak-to-peak excursion before damage
General |
|
| Product type | Cone driver |
| Brand | Beyma |
| Reference | 18LEX1600Fe |
| Product code | 118LEX10FE8 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 18 inch |
| Frequency coverage type | Sub, Low |
| Manufacturer sensitivity | 98 dB |
| Calculated sensitivity | 95.86 dB |
| Nominal power handling | 1000 W |
| Max power handling | 2000 W |
| Bandwidth | 35÷1000 Hz |
Fundamental parameters |
|
| Sd | 1255 cm² |
| Mms | 196 gr |
| Cms | 111 µm/N |
| Rms | 5.7 kg/s |
| Le | 1.9 mH |
| Re | 5.4 ohm |
| BL | 23.8 T.m |
Small signal parameters |
|
| Fs | 34 Hz |
| Qes | 0.39 |
| Qms | 7.3 |
| Qts | 0.38 |
| Vas | 250 L |
Datas |
|
| Xmax | ±11 mm |
| Calculated Xmax | ±11.5 mm |
| Xvar, Xmech, Xlim | ±25.5 mm |
| EBP | 87 Hz |
| Zmin | 7.2 ohm |
| Fs / Qts | 89 Hz |
| Vas * Qts² | 36.1 L |
| Efficiency | 2.4 % |
| Calculated efficiency | 2.42 % |
| Weight | ~11.7 kg |
| Air volume occupied by the driver | 7.5 L |
Dimensions |
|
| Voice coil diameter | 3.5 inch |
| Winding depth | 27 mm |
| Gap height | 12 mm |
| Outside diameter | 462 mm |
| Baffle cutout diameter | 426 mm |
| Depth | 224 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Aluminium |
| Winding material | Copper |
| Surround shape | Triple roll |
| Surround material | Cloth |
Question about Beyma 18LEX1000FE-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Beyma 18LEX1000FE-8, Range, version, replacement...
From Beyma
From others manufacturers
With Beyma 18LEX1000FE-8, customers has also bought
Informations Beyma 18LEX1000FE-8
Optimized for direct radiation and band-pass subwoofer applications
High power handling and low distortion 18" subwoofer
Exclusive Malt Cross® Technology Cooling System
Low power compression losses
High sensitivity: 98 dB (1W / 1m)
FEA optimized neodymium magnetic circuit
Ultra low air noise
Optimized linear behaviour
Waterproof cone with treatment for both sides
3.5" DUO in/out copper voice coil
Extended controlled displacement: Xmax ± 11 mm
51 mm peak-to-peak excursion before damage
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
High power handling and low distortion 18" subwoofer
Exclusive Malt Cross® Technology Cooling System
Low power compression losses
High sensitivity: 98 dB (1W / 1m)
FEA optimized neodymium magnetic circuit
Ultra low air noise
Optimized linear behaviour
Waterproof cone with treatment for both sides
3.5" DUO in/out copper voice coil
Extended controlled displacement: Xmax ± 11 mm
51 mm peak-to-peak excursion before damage
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Beyma 18LEX1000FE-8
SPL vs Impedance measure
Dimensions
