Pair of fullrange speaker MarkAudio CHP-90, 4 ohm, 151 mm
|
MarkAudio |
CHP-90 |
CHP-90-4 |
Cone driver |
|
|
Brand MarkAudio |
Model CHP-90 |
TLHP code CHP-90-4 |
|
|
Product type Cone driver |
|
||
Unavailable
General |
|
| Product type | Cone driver |
| Brand | MarkAudio |
| Reference | CHP-90 |
Informations |
|
| Product manufacturer range | 6 inch, CH |
| Nominal impedance | 4 ohm |
| Dimensional category | 6 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 89.2 dB |
| Calculated sensitivity | 89.01 dB |
| Nominal power handling | 40 W |
| Bandwidth | 37÷28000 Hz |
Fundamental parameters |
|
| Sd | 85 cm² |
| Mms | 5.41 gr |
| Cms | 1989.8 µm/N |
| Rms | 0.75 kg/s |
| Le | 0.26 mH |
| Re | 6.2 ohm |
| BL | 4.84 T.m |
Small signal parameters |
|
| Fs | 48.53 Hz |
| Qes | 0.44 |
| Qms | 2.2 |
| Qts | 0.36 |
| Vas | 20.05 L |
Datas |
|
| Xmax | ±7 mm |
| EBP | 110 Hz |
| Fs / Qts | 135 Hz |
| Vas * Qts² | 2.6 L |
| Calculated efficiency | 0.5 % |
Dimensions |
|
| Outside diameter | 151 mm |
| Baffle cutout diameter | 125.5 mm |
| Depth | 70 mm |
| Front thickness | 7 mm |
| Depth after front | 63 mm |
| Diamètre aimant (mm) | 90 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Plastic |
| Surround shape | One roll |
Question about MarkAudio CHP-90-4
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
MarkAudio CHP-90-4, Range, version, replacement...
Informations MarkAudio CHP-90-4
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes MarkAudio CHP-90-4
SPL measure
Impedance measure
Dimensions
