Mundorf
€12.74 IT/piece |
![]() |
Mundorf BL71 air core coil, 1.8mH ±2%, 1.22ohm, 0.71mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-1,80
BL71-1,80
|
Mundorf
€30.66 IT/piece |
![]() |
Mundorf BL140 air core coil, 1mH ±2%, 0.28ohm, 1.40mm OFC-copper wire, Ø58xH28mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-1,00
BL140-1,00
|
Mundorf
€51.16 IT/piece |
![]() |
Mundorf BL125 air core coil, 4.7mH ±2%, 0.84ohm, 1.25mm OFC-copper wire, Ø77xH28mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-4,70
BL125-4,70
|
Mundorf
€9.18 IT/piece |
![]() |
Mundorf H71 ferrite core coil, 2.2mH ±3%, 0.37ohm, 0.71mm OFC-copper wire, Ø26xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H71-2,20
H71-2,20
|
Mundorf
€8.12 IT/piece |
![]() |
Mundorf L50 air core coil, 1.8mH ±2%, 2.26ohm, 0.50mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-1,80
L50-1,80
|
Mundorf
€38.34 IT/piece |
![]() |
Mundorf L100 air core coil, 6.8mH ±2%, 1.56ohm, 1.00mm OFC-copper wire, Ø70xH29mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-6,80
L100-6,80
|
Mundorf
€59.69 IT/piece |
![]() |
Mundorf L125 air core coil, 6.8mH ±2%, 1.19ohm, 1.25mm OFC-copper wire, Ø70xH59mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L125-6,80
L125-6,80
|
Mundorf
€15.29 IT/piece |
![]() |
Mundorf L125 air core coil, 0.56mH ±2%, 0.24ohm, 1.25mm OFC-copper wire, Ø58xH18mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L125-0,56
L125-0,56
|