Mundorf
€8.55 IT/piece |
![]() |
Mundorf BL100 air core coil, 0.12mH ±2%, 0.15ohm, 1.00mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-0,12
BL100-0,12
|
Mundorf
€3.34 IT/piece |
![]() |
Mundorf L50 air core coil, 0.12mH ±2%, 0.42ohm, 0.50mm OFC-copper wire, Ø25xH10mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-0,12
L50-0,12
|
Mundorf
€20.42 IT/piece |
![]() |
Mundorf L100 air core coil, 2.2mH ±2%, 0.77ohm, 1.00mm OFC-copper wire, Ø58xH22mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-2,20
L100-2,20
|
Mundorf
€26.40 IT/piece |
![]() |
Mundorf LL60 litz wire air core coil, 0.22mH ±2%, 0.11ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø28xL58mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-0,22
LL60-0,22
|
Mundorf
€71.34 IT/piece |
![]() |
iCore feron coil Mundorf BS140, 18mH ±3%, 0.46ohm, 130x37xH37mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
€25.58 IT/piece |
![]() |
Mundorf BH180 aronit core coil, 0.47mH ±3%, 0.05ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-0,47
BH180-0,47
|
Mundorf
€5.82 IT/piece |
![]() |
Mundorf BL71 air core coil, 0.12mH ±2%, 0.28ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,12
BL71-0,12
|
Mundorf
€11.69 IT/piece |
![]() |
Mundorf H100 ferrite core coil, 1.5mH ±3%, 0.17ohm, 1.00mm OFC-copper wire, Ø30xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H100-1,5
H100-1,5
|