Mundorf
€18.75 IT/piece |
![]() |
Mundorf BH71 ferrite core coil, 15mH ±3%, 1.15ohm, 0.71mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€9.82 IT/piece |
![]() |
Mundorf BL100 air core coil, 0.22mH ±2%, 0.21ohm, 1.00mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-0,22
BL100-0,22
|
Mundorf
€4.02 IT/piece |
![]() |
Mundorf L50 air core coil, 0.22mH ±2%, 0.59ohm, 0.50mm OFC-copper wire, Ø25xH10mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-0,22
L50-0,22
|
Mundorf
€28.10 IT/piece |
![]() |
Mundorf L100 air core coil, 3.9mH ±2%, 1.13ohm, 1.00mm OFC-copper wire, Ø58xH28mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-3,90
L100-3,90
|
Mundorf
€29.03 IT/piece |
![]() |
Mundorf BH180 aronit core coil, 0.82mH ±3%, 0.06ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-0,82
BH180-0,82
|
Mundorf
€42.75 IT/piece |
![]() |
Mundorf BH180 aronit core coil, 2.2mH ±3%, 0.12ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-2,2
BH180-2,2
|
Mundorf
€8.55 IT/piece |
![]() |
Mundorf L125 air core coil, 0.15mH ±2%, 0.11ohm, 1.25mm OFC-copper wire, Ø40xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L125-0,15
L125-0,15
|
Mundorf
€18.70 IT/piece |
![]() |
Mundorf CFC16 air copper foil coil, 0.22mH ±2%, 0.15ohm, 17x0.07mm OFC-copper wire, Ø39xH24mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC16-0,22
CFC16-0,22
|