Mundorf
€11.87 IT/piece |
Mundorf LL45 litz wire air core coil, 0.1mH ±2%, 0.11ohm, 7x0.45mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL45-0,10
LL45-0,10
|
Mundorf
€36.89 IT/piece |
Mundorf BS100 feron core coil, 8.2mH ±3%, 0.58ohm, 1mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 84x29xH29mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
€22.98 IT/piece |
Mundorf LL60 litz wire air core coil, 0.15mH ±2%, 0.09ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø18xL58mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-0,15
LL60-0,15
|
Mundorf
€85.31 IT/piece |
Mundorf BL125 air core coil, 10mH ±2%, 1.49ohm, 1.25mm OFC-copper wire, Ø70xH59mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |
Mundorf
€15.29 IT/piece |
Mundorf BL125 air core coil, 0.39mH ±2%, 0.2ohm, 1.25mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-0,39
BL125-0,39
|
Mundorf
€24.68 IT/piece |
Mundorf BL125 air core coil, 1mH ±2%, 0.34ohm, 1.25mm OFC-copper wire, Ø58xH22mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-1,00
BL125-1,00
|
Mundorf
€13.37 IT/piece |
Mundorf H50 ferrite core coil, 18mH ±3%, 2.3ohm, 0.50mm OFC-copper wire, Ø30xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€4.78 IT/piece |
Mundorf L50 air core coil, 0.39mH ±2%, 0.85ohm, 0.50mm OFC-copper wire, Ø25xH10mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-0,39
L50-0,39
|