Mundorf
€55.42 IT/piece |
Mundorf BL180 air core coil, 1.2mH ±2%, 0.22ohm, 1.80mm OFC-copper wire, Ø77xH28mm, with backed varnish wire
BL180-1,2
BL180-1,2
|
Mundorf
€16.73 IT/piece |
Mundorf H125 ferrite core coil, 1.8mH ±3%, 0.14ohm, 1.25mm OFC-copper wire, Ø40xH37mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H125-1,8
H125-1,8
|
Mundorf
€14.44 IT/piece |
Mundorf BL125 air core coil, 0.33mH ±2%, 0.18ohm, 1.25mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-0,33
BL125-0,33
|
Mundorf
€4.52 IT/piece |
Mundorf L50 air core coil, 0.33mH ±2%, 0.78ohm, 0.50mm OFC-copper wire, Ø25xH10mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-0,33
L50-0,33
|
Mundorf
€13.59 IT/piece |
Mundorf BL140 air core coil, 0.18mH ±2%, 0.11ohm, 1.40mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-0,18
BL140-0,18
|
Mundorf
€24.50 IT/piece |
Pipe core coil Mundorf H140, 3mH ±3%, 0.19ohm, Ø51xL51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H140-3,0
H140-3,0
|
Mundorf
€20.42 IT/piece |
Mundorf VLCU18 paper air copper foil coil, 0.33mH ±2%, 0.25ohm, 11.5x0.07mm OFC-copper wire, Ø44xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-0,33
VLCU18-0,33
|
Mundorf
€34.08 IT/piece |
Mundorf L100 air core coil, 5.6mH ±2%, 1.35ohm, 1.00mm OFC-copper wire, Ø70xH29mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-5,60
L100-5,60
|