Mundorf
€81.30 IT/piece |
![]() |
Mundorf VLCU12 paper air copper foil coil, 0.56mH ±2%, 0.14ohm, 44x0.07mm OFC-copper wire, Ø60xH53mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU12-0,56
VLCU12-0,56
|
Mundorf
€11.55 IT/piece |
![]() |
Mundorf BH71 ferrite core coil, 2.7mH ±3%, 0.43ohm, 0.71mm OFC-copper wire, Ø26xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH71-2,7
BH71-2,7
|
Mundorf
€5.39 IT/piece |
![]() |
Mundorf L71 air core coil, 0.27mH ±2%, 0.42ohm, 0.71mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L71-0,27
L71-0,27
|
Mundorf
€28.49 IT/piece |
![]() |
Mundorf H180 aronit core coil, 1mH ±3%, 0.07ohm, 1.80mm OFC-copper wire, Ø51xH51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H180-1,0
H180-1,0
|
Mundorf
€479.85 IT/piece |
![]() |
Mundorf VN390 feron core coil, 12mH ±5%, 0.05ohm, 3.90mm OFC-copper wire, L150xH131xZ121mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |
Mundorf
€137.03 IT/piece |
![]() |
Mundorf VT180 feron core coil, 8.2mH ±3%, 0.25ohm, 1.80mm OFC-copper wire, L106xH81xZ88mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT180-8,2
VT180-8,2
|
Mundorf
€68.48 IT/piece |
![]() |
Mundorf CFC12 air copper foil coil, 0.47mH ±2%, 0.12ohm, 44x0.07mm OFC-copper wire, Ø55xH52mm, with backed varnish wire
CFC12-0,47
CFC12-0,47
|
Mundorf
€214.20 IT/piece |
![]() |
Mundorf VSCU12 feron core copper foil paper coil, 12mH ±3%, 0.32ohm, 1.98mm OFC-copper wire, L130xH88xZ88mm, with vaccum impregnated wire
|