Mundorf
€59.85 IT/piece |
![]() |
Mundorf VN140 feron core coil, 1.8mH ±5%, 0.1ohm, 1.40mm OFC-copper wire, L66xH61xZ63mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN140-1,8
VN140-1,8
|
Mundorf
€411.30 IT/piece |
![]() |
Mundorf VL390 air core coil, 1.2mH ±2%, 0.07ohm, 3.90mm OFC-copper wire, L151xH106xZ120mm, with vaccum impregnated wire
VL390-1,20
VL390-1,20
|
Mundorf
€68.47 IT/piece |
![]() |
Mundorf VLCU12 paper air copper foil coil, 0.39mH ±2%, 0.11ohm, 44x0.07mm OFC-copper wire, Ø55xH53mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU12-0,39
VLCU12-0,39
|
Mundorf
€10.65 IT/piece |
![]() |
Mundorf BH71 ferrite core coil, 1.8mH ±3%, 0.33ohm, 0.71mm OFC-copper wire, Ø26xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH71-1,8
BH71-1,8
|
Mundorf
€34.20 IT/piece |
![]() |
Mundorf VSCU15 feron core copper foil paper coil, 0.22mH ±3%, 0.04ohm, 1.40mm OFC-copper wire, L84xH26xZ26mm, with vaccum impregnated wire
VSCU15-0,22
VSCU15-0,22
|
Mundorf
€227.03 IT/piece |
![]() |
Mundorf VT300 feron core coil, 3.9mH ±3%, 0.07ohm, 3.00mm OFC-copper wire, L130xH100xZ106mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT300-3,9
VT300-3,9
|
Mundorf
€248.48 IT/piece |
![]() |
Mundorf CFC10 air copper foil coil, 1.8mH ±2%, 0.19ohm, 70x0.07mm OFC-copper wire, Ø83xH77mm, with backed varnish wire
CFC10-1,80
CFC10-1,80
|
Mundorf
€68.23 IT/piece |
![]() |
Mundorf BL140 air core coil, 4.7mH ±2%, 0.77ohm, 1.40mm OFC-copper wire, Ø70xH59mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-4,70
BL140-4,70
|