Mundorf
€17.58 IT/piece |
Mundorf H71 ferrite core coil, 18mH ±3%, 1.28ohm, 0.71mm OFC-copper wire, Ø40xH37mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€9.32 IT/piece |
Mundorf BL125 air core coil, 0.1mH ±2%, 0.09ohm, 1.25mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-0,10
BL125-0,10
|
Mundorf
€46.97 IT/piece |
iCore feron coil Mundorf BS140, 5.6mH ±3%, 0.25ohm, 106x32xH32mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.
BS140-5,60
BS140-5,60
|
Mundorf
€51.16 IT/piece |
Mundorf BL180 air core coil, 1mH ±2%, 0.2ohm, 1.80mm OFC-copper wire, Ø77xH28mm, with backed varnish wire
BL180-1,0
BL180-1,0
|
Mundorf
€15.90 IT/piece |
Mundorf H125 ferrite core coil, 1.5mH ±3%, 0.12ohm, 1.25mm OFC-copper wire, Ø40xH37mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H125-1,5
H125-1,5
|
Mundorf
€76.76 IT/piece |
Mundorf BS180 feron core coil, 4.7mH ±3%, 0.15ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 130x37xH37mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
€3.25 IT/piece |
Mundorf L50 air core coil, 0.1mH ±2%, 0.36ohm, 0.50mm OFC-copper wire, Ø25xH10mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-0,10
L50-0,10
|
Mundorf
€68.23 IT/piece |
Mundorf BL125 air core coil, 6.8mH ±2%, 1.19ohm, 1.25mm OFC-copper wire, Ø70xH59mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-6,80
BL125-6,80
|