Mundorf
€115.58 IT/piece |
Mundorf CFC14 air copper foil coil, 3.9mH ±2%, 0.55ohm, 28x0.07mm OFC-copper wire, Ø89xH34mm, with backed varnish wire
CFC14-3,90
CFC14-3,90
|
Mundorf
€29.03 IT/piece |
Mundorf VL236 air core coil, 0.1mH ±2%, 0.04ohm, 2.36mm OFC-copper wire, Ø58xH28mm, with vaccum impregnated wire
VL236-0,10
VL236-0,10
|
Mundorf
€9.83 IT/piece |
Mundorf P50 ferrite pipe core coil, 4.7mH ±3%, 2.15ohm, 0.50mm OFC-copper wire, Ø30xH23mm
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system.
P50-4,7
P50-4,7
|
Mundorf
€15.05 IT/piece |
Mundorf BH100 ferrite core coil, 1.8mH ±3%, 0.18ohm, 1.00mm OFC-copper wire, Ø35xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH100-1,8
BH100-1,8
|
Mundorf
€59.85 IT/piece |
Mundorf VSCU12 feron core copper foil paper coil, 1mH ±3%, 0.05ohm, 1.98mm OFC-copper wire, L130xH38xZ38mm, with vaccum impregnated wire
VSCU12-1,0
VSCU12-1,0
|
Mundorf
€102.75 IT/piece |
Mundorf VN125 feron core coil, 22mH ±5%, 0.47ohm, 1.25mm OFC-copper wire, L84xH76xZ70mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |
Mundorf
€111.30 IT/piece |
Mundorf VL390 air core coil, 0.15mH ±2%, 0.02ohm, 3.90mm OFC-copper wire, L105xH79xZ93mm, with vaccum impregnated wire
VL390-0,15
VL390-0,15
|
Mundorf
€128.48 IT/piece |
Mundorf VLCU15 paper air copper foil coil, 5.6mH ±2%, 0.86ohm, 22x0.07mm OFC-copper wire, Ø102xH30mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU15-5,6
VLCU15-5,6
|