Mundorf
€188.48 IT/piece |
Mundorf VN300 feron core coil, 4.7mH ±5%, 0.05ohm, 3.00mm OFC-copper wire, L106xH93xZ87mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN300-4,7
VN300-4,7
|
Mundorf
€53.03 IT/piece |
Mundorf VT140 feron core coil, 1.2mH ±3%, 0.11ohm, 1.40mm OFC-copper wire, L66xH50xZ54mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT140-1,2
VT140-1,2
|
Mundorf
€39.30 IT/piece |
Mundorf CFC14 air copper foil coil, 0.47mH ±2%, 0.16ohm, 28x0.07mm OFC-copper wire, Ø52xH34mm, with backed varnish wire
CFC14-0,47
CFC14-0,47
|
Mundorf
€188.48 IT/piece |
Mundorf VLCU12 paper air copper foil coil, 2.7mH ±2%, 0.33ohm, 44x0.07mm OFC-copper wire, Ø92xH53mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU12-2,7
VLCU12-2,7
|
Mundorf
€17.03 IT/piece |
Mundorf BH71 ferrite core coil, 12mH ±3%, 1.02ohm, 0.71mm OFC-copper wire, Ø35xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€48.75 IT/piece |
Mundorf VSCU15 feron core copper foil paper coil, 1.5mH ±3%, 0.14ohm, 1.40mm OFC-copper wire, L84xH41xZ41mm, with vaccum impregnated wire
VSCU15-1,5
VSCU15-1,5
|
Mundorf
€291.30 IT/piece |
Mundorf VT390 feron core coil, 1.5mH ±3%, 0.03ohm, 3.90mm OFC-copper wire, L130xH100xZ106mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT390-1,5
VT390-1,5
|
Mundorf
€89.85 IT/piece |
Mundorf VL236 air core coil, 1mH ±2%, 0.14ohm, 2.36mm OFC-copper wire, Ø70xH59mm, with vaccum impregnated wire
VL236-1,0
VL236-1,0
|