Mundorf
€34.08 IT/piece |
Mundorf BL100 air core coil, 4.7mH ±2%, 1.22ohm, 1.00mm OFC-copper wire, Ø70xH29mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-4,70
BL100-4,70
|
Mundorf
€7.26 IT/piece |
Mundorf L100 air core coil, 0.18mH ±2%, 0.19ohm, 1.00mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-0,18
L100-0,18
|
Mundorf
€37.76 IT/piece |
Air core coil Mundorf L200, 1mH ±2%, 0.18ohm, Ø59xL70mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L200-1,00
L200-1,00
|
Mundorf
€51.16 IT/piece |
Mundorf CFC16 air copper foil coil, 2.2mH ±2%, 0.58ohm, 17x0.07mm OFC-copper wire, Ø69xH24mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC16-2,20
CFC16-2,20
|
Mundorf
€514.20 IT/piece |
Mundorf VL390 air core coil, 1.8mH ±2%, 0.09ohm, 3.90mm OFC-copper wire, L151xH106xZ120mm, with vaccum impregnated wire
VL390-1,80
VL390-1,80
|
Mundorf
€81.30 IT/piece |
Mundorf VLCU12 paper air copper foil coil, 0.56mH ±2%, 0.14ohm, 44x0.07mm OFC-copper wire, Ø60xH53mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU12-0,56
VLCU12-0,56
|
Mundorf
€12.75 IT/piece |
Mundorf BP100 ferrite pipe core coil, 0.68mH ±3%, 0.23ohm, 1.00mm OFC-copper wire, Ø40xH23mm, with backed varnish wire
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system. 99.99% OFC copper backed varnish wire, glass fiber reinforced plastic body, ferrite / aronit core.
BP100-0,68
BP100-0,68
|
Mundorf
€28.49 IT/piece |
Mundorf H180 aronit core coil, 1mH ±3%, 0.07ohm, 1.80mm OFC-copper wire, Ø51xH51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H180-1,0
H180-1,0
|