Mundorf
€257.03 IT/piece |
![]() |
Mundorf CFC12 air copper foil coil, 6.8mH ±2%, 0.56ohm, 44x0.07mm OFC-copper wire, Ø110xH52mm, with backed varnish wire
CFC12-6,80
CFC12-6,80
|
Mundorf
€123.73 IT/piece |
![]() |
Mundorf BL180 air core coil, 4.7mH ±2%, 0.53ohm, 1.80mm OFC-copper wire, L105xH79xZ93mm, with backed varnish wire
BL180-4,7
BL180-4,7
|
Mundorf
€32.36 IT/piece |
![]() |
Mundorf CFC18 air copper foil coil, 1.8mH ±2%, 0.69ohm, 11.5x0.07mm OFC-copper wire, Ø63xH18mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC18-1,8
CFC18-1,8
|
Mundorf
€9.00 IT/piece |
![]() |
Mundorf BP71 ferrite pipe core coil, 0.82mH ±3%, 0.41ohm, 0.71mm OFC-copper wire, Ø30xH23mm, with backed varnish wire
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system. 99.99% OFC copper backed varnish wire, glass fiber reinforced plastic body, ferrite / aronit core.
BP71-0,82
BP71-0,82
|
Mundorf
€248.48 IT/piece |
![]() |
Mundorf VN236 feron core coil, 15mH ±5%, 0.15ohm, 2.36mm OFC-copper wire, L130xH115xZ97mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |
Mundorf
€145.58 IT/piece |
![]() |
Mundorf VN180 feron core coil, 12mH ±5%, 0.17ohm, 1.80mm OFC-copper wire, L96xH86xZ84mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |
Mundorf
€18.70 IT/piece |
![]() |
Mundorf BL100 air core coil, 1.2mH ±2%, 0.55ohm, 1.00mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-1,20
BL100-1,20
|
Mundorf
€257.03 IT/piece |
![]() |
Mundorf VL236 air core coil, 6.8mH ±2%, 0.42ohm, 2.36mm OFC-copper wire, L123xH89xZ108mm, with vaccum impregnated wire
VL236-6,8
VL236-6,8
|