Peerless |
HDS-P830883 |
HDS-P830883-8 |
Cone driver |
|
Brand Peerless |
Model HDS-P830883 |
TLHP code HDS-P830883-8 |
|
Product type Cone driver |
|
This 6.5 inch 8 ohm driver is a member of the high performance HDS family. A powerful ferrite magnet system is coupled to a finite element analysis designed suspension system, containing both a linear spider design and a rubber surround. The motor contains an aluminium shorting ring, which reduces coil inductance, thus providing both extended frequency response performance and reduced distortion.
The long-throw voice coil ensures linear high excursion performance, needed for signal clarity. The driver employs a phase plug for low compression and frequency response shaping without the use of a dust cap. The cast aluminium basket offers structural rigidity, heat sinking capacity for the motor, and additional air venting under the spider so as to again reduce air compression effects. The cone in this model is nomex based, offering a unique visual and acoustic experience.
General |
|
Product type | Cone driver |
Brand | Peerless |
Reference | HDS-P830883 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 7 inch |
Frequency coverage type | Sub, Low |
Manufacturer sensitivity | 86.1 dB |
Calculated sensitivity | 87.78 dB |
Nominal power handling | 70 W |
Fundamental parameters |
|
Sd | 143.1 cm² |
Mms | 17.3 gr |
Cms | 795.6 µm/N |
Le | 0.18 mH |
Re | 5.85 ohm |
BL | 7.7 T.m |
Small signal parameters |
|
Fs | 42.85 Hz |
Qes | 0.46 |
Qms | 2.18 |
Qts | 0.38 |
Vas | 22.9 L |
Datas |
|
Xmax | ±5.6 mm |
EBP | 93 Hz |
Zmin | 6.67 ohm |
Fs / Qts | 113 Hz |
Vas * Qts² | 3.31 L |
Calculated efficiency | 0.38 % |
Dimensions |
|
Voice coil diameter | 1.3 inch |
Gap height | 6 mm |
Outside diameter | 180 mm |
Baffle cutout diameter | 146 mm |
Front thickness | 9.2 mm |
Depth after front | 78 mm |
Diamètre aimant (mm) | 102 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Aluminium |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
|