Speaker Celestion TN1230, 8 ohm, 12 inch
|
Celestion |
TN1230 |
TN1230-8 |
T5488 |
Cone driver |
|
|
Brand Celestion |
Model TN1230 |
TLHP code TN1230-8 |
Manufacturer code T5488 |
|
|
Product type Cone driver |
|
|||
Unavailable
-
12" Bass and mid-range driver provides 300Wrms (AES standard) power handling and 97dB sensitivity
3" high-temperature copper voice coil wound on polyimide for increased reliability
FEA optimised neodymium magnet assembly design for lower weight and reduced harmonic distortion
"M-Roll" surround provides progressive excursion control yielding a smooth response curve at extremes of frequency range
Kevlar-loaded cone with sealed surround and damping contributes to lower distortion
Rigid chassis design for maximum energy transfer
General |
|
| Product type | Cone driver |
| Brand | Celestion |
| Reference | TN1230 |
| Product code | T5488 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 12 inch |
| Frequency coverage type | Low, Midbass, Midrange |
| Country Origin | CN |
| Manufacturer sensitivity | 97 dB |
| Calculated sensitivity | 97.01 dB |
| Nominal power handling | 300 W |
| Bandwidth | 50÷4000 Hz |
Fundamental parameters |
|
| Mms | 56.11 gr |
| Le | 0.94 mH |
| Re | 5.33 ohm |
Small signal parameters |
|
| Fs | 54.8 Hz |
| Qes | 0.3 |
| Qms | 3.11 |
| Qts | 0.28 |
| Vas | 59.86 L |
Datas |
|
| Xmax | ±3.75 mm |
| EBP | 183 Hz |
| Fs / Qts | 196 Hz |
| Vas * Qts² | 4.7 L |
| Calculated efficiency | 3.16 % |
| Weight | ~3 kg |
Dimensions |
|
| Voice coil diameter | 3 inch |
| Outside diameter | 309 mm |
| Baffle cutout diameter | 283 mm |
| Depth after front | 132 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Neodymium |
Question about Celestion TN1230-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Informations Celestion TN1230-8
12" Bass and mid-range driver provides 300Wrms (AES standard) power handling and 97dB sensitivity
3" high-temperature copper voice coil wound on polyimide for increased reliability
FEA optimised neodymium magnet assembly design for lower weight and reduced harmonic distortion
"M-Roll" surround provides progressive excursion control yielding a smooth response curve at extremes of frequency range
Kevlar-loaded cone with sealed surround and damping contributes to lower distortion
Rigid chassis design for maximum energy transfer
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
3" high-temperature copper voice coil wound on polyimide for increased reliability
FEA optimised neodymium magnet assembly design for lower weight and reduced harmonic distortion
"M-Roll" surround provides progressive excursion control yielding a smooth response curve at extremes of frequency range
Kevlar-loaded cone with sealed surround and damping contributes to lower distortion
Rigid chassis design for maximum energy transfer
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Celestion TN1230-8
SPL vs Impedance measure *
* Tested for two hours using a continuous
