Speaker RCF L12P110K, 8 ohm, 12.28 inch
|
RCF |
L12P110K |
L12P110K-8 |
11146001 |
Cone driver |
|
|
Brand RCF |
Model L12P110K |
TLHP code L12P110K-8 |
Manufacturer code 11146001 |
|
|
Product type Cone driver |
|
|||
-
Incredibly linear frequency response characteristics, extreme high power handling while generating the lowest harmonic distortion of any comparable 18-inch transducer within its application range.
Special treatment are applied to cone surface and surround for optimum dampening.
Features :
4-inch, fiberglass inside/outside copper voice coil
1000W continuous program power handling
101 dB Sensitivity
60 Hz – 2 kHz Frequency range
M-roll damped surround
Corrugated straight damped cone
Applications :
The L12P110K is specially designed for compact size bass reflex enclosures.
The unique combination of short voice coil and very high BL / Re ratio makes the L12P100K a very good choise when fast and precise mid-bass reproduction is required.
Very good for high power horn loaded applications.
General |
|
| Product type | Cone driver |
| Brand | RCF |
| Reference | L12P110K |
| Product code | 11146001 |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 12.5 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 101 dB |
| Calculated sensitivity | 99.6 dB |
| Nominal power handling | 500 W |
| Bandwidth | 60÷2000 Hz |
Fundamental parameters |
|
| Sd | 500 cm² |
| Mms | 55 gr |
| Le | 1 mH |
| Re | 5.6 ohm |
| BL | 25 T.m |
Small signal parameters |
|
| Fs | 44 Hz |
| Qes | 0.14 |
| Qms | 4.3 |
| Qts | 0.13 |
| Vas | 98 L |
Datas |
|
| Xmax | ±3 mm |
| Calculated Xmax | ±4 mm |
| EBP | 314 Hz |
| Zmin | 7 ohm |
| Fs / Qts | 338 Hz |
| Vas * Qts² | 1.66 L |
| Efficiency | 5.75 % |
| Calculated efficiency | 5.73 % |
Dimensions |
|
| Voice coil diameter | 4 inch |
| Winding depth | 11 mm |
| Gap height | 9 mm |
| Outside diameter | 312 mm |
| Baffle cutout diameter | 280 mm |
| Front thickness | 12 mm |
| Depth after front | 103 mm |
| Diamètre aimant (mm) | 220 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Aluminium |
| Winding material | Copper |
| Voice coil former | Glass fiber |
| Surround material | Cloth |
Question about RCF L12P110K-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
RCF L12P110K-8, Range, version, replacement...
From RCF
From others manufacturers
Repair RCF L12P110K-8
Informations RCF L12P110K-8
Special treatment are applied to cone surface and surround for optimum dampening.
Features :
4-inch, fiberglass inside/outside copper voice coil
1000W continuous program power handling
101 dB Sensitivity
60 Hz – 2 kHz Frequency range
M-roll damped surround
Corrugated straight damped cone
Applications :
The L12P110K is specially designed for compact size bass reflex enclosures.
The unique combination of short voice coil and very high BL / Re ratio makes the L12P100K a very good choise when fast and precise mid-bass reproduction is required.
Very good for high power horn loaded applications.
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes RCF L12P110K-8
SPL measure *
* Frequency response curve of the loudspeaker taken in a hemispherical
Impedance measure
Dimensions
