Speaker Monacor SP-250P, 8 ohm, 10.43 inch
|
Monacor |
SP-250P |
SP-250P-8 |
Cone driver |
|
|
Brand Monacor |
Model SP-250P |
TLHP code SP-250P-8 |
|
|
Product type Cone driver |
|
||
Unavailable
-
Haut-parleur de grave, 200 WMAX, 100 WRMS, 8 ?
Perçage des pièces polaires
Grande excursion linéaire, pour graves puissants
General |
|
| Product type | Cone driver |
| Brand | Monacor |
| Reference | SP-250P |
Informations |
|
| Nominal impedance | 8 ohm |
| Dimensional category | 10.5 inch |
| Frequency coverage type | Sub, Low, Midbass |
| Manufacturer sensitivity | 94 dB |
| Calculated sensitivity | 92.21 dB |
| Nominal power handling | 100 W |
| Max power handling | 200 W |
| Bandwidth | 33÷4000 Hz |
Fundamental parameters |
|
| Sd | 346 cm² |
| Mms | 33 gr |
| Cms | 0.69 µm/N |
| Le | 1.2 mH |
| Re | 6.5 ohm |
| BL | 10.8 T.m |
Small signal parameters |
|
| Fs | 33 Hz |
| Qes | 0.38 |
| Qms | 2.33 |
| Qts | 0.33 |
| Vas | 115 L |
Datas |
|
| Xmax | ±3.5 mm |
| EBP | 87 Hz |
| Fs / Qts | 100 Hz |
| Vas * Qts² | 12.53 L |
| Calculated efficiency | 1.05 % |
Dimensions |
|
| Voice coil diameter | 2 inch |
| Outside diameter | 265 mm |
| Baffle cutout diameter | 233 mm |
| Depth | 120 mm |
| Front thickness | 9.5 mm |
| Depth after front | 110.5 mm |
| Diamètre aimant (mm) | 145 mm |
Shape & Materials |
|
| Front chape | Cylindrical |
| Magnet type | Ferrite |
| Basket masterial | Acier |
| Voice coil former | Aluminium |
| Surround shape | One roll |
| Surround material | Foam |
Question about Monacor SP-250P-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
Monacor SP-250P-8, Range, version, replacement...
Informations Monacor SP-250P-8
Haut-parleur de grave, 200 WMAX, 100 WRMS, 8 ?
Perçage des pièces polaires
Grande excursion linéaire, pour graves puissants
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Perçage des pièces polaires
Grande excursion linéaire, pour graves puissants
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Monacor SP-250P-8
SPL vs Impedance measure
Dimensions
