Audax |
HM210C0 |
HM210C0-8 |
100982T |
Cone driver |
Sold by piece |
|
Brand Audax |
Model HM210C0 |
TLHP code HM210C0-8 |
Manufacturer code 100982T |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
This product is in the process of supply to be in stock.
Reserved on order
Next TLHP reception estimated between May 28, 2024 and Jun 4, 2024
Non resonant die cast chassis. Ventilated chassis under spider. Woven carbon fiber cone. High loss, high compliance rubber suspension. Edgewound, flat copper wire. Kapton voice coil former. Vented pole piece with protection grill. Gold plated terminals.
Designed for high-end 2 or 3-way self standing systems, this 8 inch bass-midrange driver offers the advantages of a very stiff and light woven Carbon Fiber cone coupled to a high loss rubber suspension. Bass reproduction is firm, tight and dynamic while the cone motion is well damped and controlled by the high compliance, high loss rubber surround. Special consideration has been taken to ensure the best possible transient response, and a exceptionnaly natural top end roll-off. Unostructed venting of the Zamack die cast chassis, coupled with a grill protected, vented pole piece and a soft polymer dustcap all contribute to the dramatic transient response. High power handling resultats from the flat, edgewound copper coil mounted onto a fiberglass reinforced Kapton coil former. Gold plated terminals offer excellent solderability.
General |
|
Product type | Cone driver |
Brand | Audax |
Reference | HM210C0 |
Product code | 100982T |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 8.5 inch |
Frequency coverage type | Sub |
Manufacturer sensitivity | 90 dB |
Calculated sensitivity | 89.55 dB |
Nominal power handling | 70 W |
Fundamental parameters |
|
Sd | 232 cm² |
Mms | 23.5 gr |
Le | 0.42 mH |
Re | 6.5 ohm |
BL | 8.5 T.m |
Small signal parameters |
|
Fs | 31 Hz |
Qes | 0.42 |
Qms | 5.17 |
Qts | 0.39 |
Vas | 83 L |
Datas |
|
Flux density | 1 T |
Xmax | ±4.15 mm |
Calculated Xmax | ±6.15 mm |
EBP | 74 Hz |
Zmin | 6.9 ohm |
Fs / Qts | 79 Hz |
Vas * Qts² | 12.63 L |
Calculated efficiency | 0.57 % |
Weight | ~2.3 kg |
Recommended load volume | 35 L |
Fréquence d'accord liée à la charge | 35 Hz |
Dimensions |
|
Voice coil diameter | 1.57 inch |
Winding depth | 14.3 mm |
Gap height | 6 mm |
External dimensions | 210 | 210 mm |
Baffle cutout diameter | 186.5 mm |
Front thickness | 7.3 mm |
Depth after front | 89 mm |
Diamètre aimant (mm) | 102.5 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Zamak |
Winding material | Copper |
Voice coil former | Kapton |
Surround material | Rubber |
Dome material | Polymer |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.