.Kartesian
€18.12 IT/piece |
Terminal for Kartesian crossover
Bi-wiring terminal with 9 plugs to screw the crossover. It is compatible with: speaker cable (4mm² max), banana plug (Ø4mm), fork (Ø8mm). Suitable for Kartesian crossovers. |
.Kartesian
€6.36 IT/piece |
Tube for Kartesian kit
Vent with optimized cross section to avoid noises and turbulences in the air flow. It is quiet with air speed until 22m/s. Equivalent cylinder for enclosure calculation is : Ø45mm / Length : 80mm. Suitable for loudspeakers until ~135mm diameter. Hole diameter to be cut on the enclosure is Ø75mm, with recommended 3mm chamfer at 45°. Four blades ensure stable assembling. |
.Kartesian
€354.12 IT/kit |
Kompact_4
Flat speaker kit Kartesian Kompacte_4 with speakers and passive crossover, bornier, amortissement and vis (sans caisse)
Kompacte_4 is high-quality low-profile speaker system (120mm deep), designed to hang on the wall. |
.Kartesian
€258.00 IT/piece |
Wom145_vHE 8 ohm
Speaker Kartesian Wom145_vHE, 8 ohm, 144.3 mm
Wom145_vHE is a very high quality 5" woofer designed to cover 45Hz - 3000Hz in High End products. |
.Kartesian
€133.08 IT/piece |
Wom165_vMS 8 ohm
Speaker Kartesian Wom165_vMS, 8 ohm, 164.5 mm
Wom165_vMS provides accurate bass response in compact vented enclosure and extended frequency response. The suspension uses the .dynamiK technology to keep excursion control in any situation. The motor structure, engineered with FEA, uses cooper ring for very low THD. The cone is made with our proprietary CGF material, 10 times more rigid than usual carbon fiber. |
.Kartesian
€122.16 IT/piece |
Wom145_vMS 6 ohm
Speaker Kartesian Wom145_vMS, 6 ohm, 144.5 mm
Wom145_vMS provides accurate bass response in compact vented enclosure and extended frequency response. The suspension uses the .dynamiK technology to keep excursion control in any situation. The motor structure, engineered with FEA, uses cooper ring for very low THD. The cone is made with our proprietary CGF material, 10 times more rigid than usual carbon fiber. |
.Kartesian
€72.00 IT/piece |
Crossover Kompacte 4
Passive crossover Kartesian for KOMPACTE 4 kit, PCB board, external dimensions 148 x 83 mm
Wires to connect loudspeakers are included on crossover (Silver plated cooper, PTFE sheath). |
.Kartesian
€576.00 IT/piece |
Sub250_vHE
Speaker Kartesian Sub250_vHE, 8 ohm, 10 inch
Sub250_vHE has been designed to reproduce powerful bass impact and every single detail in low frequency. |
.Kartesian
€93.60 IT/piece |
Crossover Korpus 5
Passive crossover Kartesian for KORPUS 5 kit, PCB board, external dimensions 148 x 83 mm
Wires to connect loudspeakers are included on crossover (Silver plated cooper, PTFE sheath). |
.Kartesian
€111.48 IT/piece |
Sub120_vHP 8 ohm
Speaker Kartesian Sub120_vHP, 8 ohm, 120 mm
Sub120_vHP-F is a unique combination of a subwoofer and a mid-band. Thanks to its 120mm diameter, the Aluminum - Carbone fiber cone works perfectly until 2500Hz. The suspension and the motor structure has been designed to ensure long excursion with minimum distortion. As a result, in association with our 28mm soft dome tweeter, it is possible to built a very compact 2 ways system (5-6L) reproducing 45Hz to 3000Hz (-3dB). |
.Kartesian
€179.04 IT/piece |
Wib120_vHE 8 ohm
Speaker Kartesian Wib120_vHE, 8 ohm, 120 mm
Wib120_vHE is a modern wide band, allying low frequency extension and linear frequency response up to 22kHz. |
.Kartesian
€264.00 IT/piece |
Wom250_vPA 8 ohm
Speaker Kartesian Wom250_vPA, 8 ohm, 267 mm
Wom250_vPA is engineered to cover 50 - 850Hz (-3dB) in a very compact enclosure (sealed or vented). The advanced motor structure is built with Ø116mm voice coil, high grade ferrite magnet and it is demodulated by 2 Aluminum rings. This woofer allows new product design, such as low profile professional system with very low THD rate and high power handling. |
.Kartesian
€105.36 IT/piece |
Wom120_vMS 8 ohm
Speaker Kartesian Wom120_vMS, 8 ohm, 120 mm
Wom120_vMS is a very high quality mid-woofer, with extreme linearity and low distortion from 80Hz to 4000Hz. It uses the advanced hexaKone, made of treated paper with embossed honeycomb structure. The suspension is assembled on the back of the cone to avoid any diffraction out of axe. The magnetic system has been engineered with FEA and it uses a long cooper ring to minimize inductance effects. |
.Kartesian
€74.40 IT/piece |
Crossover Cox120
Passive crossover for Kartesian COX120_VHP, PCB board, silver capacitor, external dimensions 143 x 83 mm
|
.Kartesian
€48.24 IT/piece |
Horn Kartesian for Twt28_vMS
Aluminium machined horn, dedicated to Twt30_vMS. This horn provides higher sensitivity to the Twt28_vMS from 1000Hz. As a consequence, the Twt28_vMS can play higher sound level with very low THD, or reach soft crossover point around 2500Hz. |
.Kartesian
€47.52 IT/piece |
Horn Kartesian for TWT30_vMS
Aluminium machined horn, dedicated to Twt30_vMS. This horn provide provides higher sensitivity to the Twt30_vMS in the mid mid-band. As a consequence, the Twt30_vMS can play higher sound level with very low THD, or reach soft crossover point around 1800Hz. |