Eighteen Sound
€108.09 IT/piece |
15MB700 8 ohm
Recone kit for 18 Sound 15MB700, 8 ohm, glue not included
RCK150700WF080B
RCK150700WF080B
|
Eighteen Sound
€105.22 IT/piece |
12ND930 8 ohm
Recone kit for 18 Sound 12ND930, 8 ohm, glue not included
R-KIT 12ND930 - RCK120930WF080A - 027128N220
R-KIT 12ND930 - RCK120930WF080A - 027128N220
|
Eighteen Sound
Unavailable |
15NW530 8 ohm
Speaker 18 Sound 15NW530, 8 ohm, 15 inch
ALT150530WF08NB
ALT150530WF08NB
|
Eighteen Sound
Unavailable |
12LW801 4 ohm
Speaker 18 Sound 12LW800, 4 ohm, 12 inch
The 12LW800 is a low frequency loudspeaker which sets a new industry standard in 12" (300mm) Ø high performance transducers, achieving a remarkable 42Hz downwards extension with 96dB average sensitivity and handling peak power levels of 4000W with remarkably low distortion and excellent transient response. The 12LW800 is intended as the low bass or sub-woofer component, either in highly compact reflex, bandpass or horn loaded configurations, in which it provides clean, linear frequency reproduction at high power levels, or as part of a compact high power fullrange system. In its reflex configuration, it can be used in extremely compact enclosures (40 - 70lt) making it ideal for portable applications such as road shows and bass musical instruments, for “wedge" stage monitors, etc. The high excursion capabilities of the double-action roll surround and suspension system, in conjunction with the Double Silicon Spider (DSS), enable the 12LW800 to achieve very high levels of linear travel for a 12" unit. With its custom design surround, the carbon fiber reinforced curvilinear ribbed cone assures smooth response and exceptional strength with maximum reliability under high mechanical stress. The 75 mm state-of-the-art voice coil employs the Interleaved Sandwich Voice coil (ISV), in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil and providing a uniform motive drive. This, in conjunction with the use of unique high temperature resin adhesives, results in an extremely linear motor assembly with reduced tendency to break-up under hard drive conditions. Excellent heat dissipation is achieved incorporating air channels between the basket and the top plate. Maximum flux concentration and force factor in the gap are assured by the unique shape and design of the face and back plates, which have been designed using our in-house Magnetic Flux FEA CAD resource. The ability to perform properly under inclement weather conditions is an essential point of the Eighteen Sound philosophy. These features are obtained through an exclusive cone treatment improving pulp strength and giving water repellent properties to the cone. In addition, a special treatment applied to both the face and back plates allows the product to be far more resistant to the corrosive effects of salts and oxidization than any other treatment in use.
ALT120801WF04FA
ALT120801WF04FA
|
Eighteen Sound
Unavailable |
12LW800 8 ohm
Speaker 18 Sound 12LW800, 8 ohm, 12 inch
ALT120800WF08FA
ALT120800WF08FA
|
Eighteen Sound
€261.12 IT/piece |
15MB650 4 ohm
Speaker 18 Sound 15MB650, 4 ohm, 15 inch
221545240
221545240
|
Eighteen Sound
Unavailable |
15MB650 8 ohm
Speaker 18 Sound 15MB650, 8 ohm, 15 inch
ALT150650WF08FA
ALT150650WF08FA
|
Eighteen Sound
Unavailable |
12ND730 8 ohm
Speaker 18 Sound 12ND730, 8 ohm, 12 inch
98 dB SPL 1W/ 1maverage sensitivity 75mm(3 in) Interleaved Sandwich Voice coil (ISV) 600Wprogrampower handling High force neodymiummagnet assembly Ideal forcompact high loading enclosures
ALT120730WF08NA
ALT120730WF08NA
|