Mundorf
€22.62 IT/piece |
![]() |
Mundorf BH100 ferrite core coil, 6.8mH ±3%, 0.46ohm, 1.00mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH100-6,8
BH100-6,8
|
Mundorf
€14.22 IT/piece |
![]() |
Mundorf BH100 ferrite core coil, 1.5mH ±3%, 0.17ohm, 1.00mm OFC-copper wire, Ø30xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH100-1,5
BH100-1,5
|
Mundorf
€13.37 IT/piece |
![]() |
Mundorf BH100 ferrite core coil, 1.2mH ±3%, 0.15ohm, 1.00mm OFC-copper wire, Ø30xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH100-1,2
BH100-1,2
|
Mundorf
€20.48 IT/piece |
![]() |
Mundorf BH140 ferrite core coil, 1.5mH ±3%, 0.1ohm, 1.40mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH140-1,5
BH140-1,5
|
Mundorf
€15.90 IT/piece |
![]() |
Mundorf BH100 ferrite core coil, 2.2mH ±3%, 0.2ohm, 1.00mm OFC-copper wire, Ø35xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH100-2,2
BH100-2,2
|
Mundorf
€18.41 IT/piece |
![]() |
Mundorf BH100 ferrite core coil, 3.9mH ±3%, 0.3ohm, 1.00mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH100-3,9
BH100-3,9
|
Mundorf
€30.66 IT/piece |
![]() |
Mundorf BL140 air core coil, 1mH ±2%, 0.28ohm, 1.40mm OFC-copper wire, Ø58xH28mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-1,00
BL140-1,00
|
Mundorf
€24.68 IT/piece |
![]() |
Mundorf BL125 air core coil, 1mH ±2%, 0.34ohm, 1.25mm OFC-copper wire, Ø58xH22mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-1,00
BL125-1,00
|