Mundorf
€377.03 IT/piece |
![]() |
Mundorf VL300 air core coil, 4.7mH ±2%, 0.24ohm, 3.00mm OFC-copper wire, L151xH106xZ120mm, with vaccum impregnated wire
VL300-4,70
VL300-4,70
|
Mundorf
€411.30 IT/piece |
![]() |
Mundorf VL300 air core coil, 5.6mH ±2%, 0.25ohm, 3.00mm OFC-copper wire, L151xH106xZ120mm, with vaccum impregnated wire
VL300-5,60
VL300-5,60
|
Mundorf
€454.20 IT/piece |
![]() |
Mundorf VL300 air core coil, 6.8mH ±2%, 0.29ohm, 3.00mm OFC-copper wire, L151xH106xZ120mm, with vaccum impregnated wire
VL300-6,80
VL300-6,80
|
Mundorf
€514.20 IT/piece |
![]() |
Mundorf VL300 air core coil, 8.2mH ±2%, 0.32ohm, 3.00mm OFC-copper wire, L151xH106xZ120mm, with vaccum impregnated wire
VL300-8,20
VL300-8,20
|
Mundorf
€16.62 IT/piece |
![]() |
Mundorf MCap Evo capacitor, 10µF ±3%, 450VDC/310VAC, Ø40xL27mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-10T3.450
ME-10T3.450
|
Mundorf
€20.79 IT/piece |
![]() |
Mundorf MCap Evo capacitor, 12µF ±3%, 450VDC/310VAC, Ø35xL35mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-12T3.450
ME-12T3.450
|
Mundorf
€24.96 IT/piece |
![]() |
Mundorf MCap Evo capacitor, 15µF ±3%, 450VDC/310VAC, Ø40xL35mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-15T3.450
ME-15T3.450
|
Mundorf
€29.13 IT/piece |
![]() |
Mundorf MCap Evo capacitor, 18µF ±3%, 450VDC/310VAC, Ø50xL35mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-18T3.450
ME-18T3.450
|