Search results for 'B C'
Mundorf
€33.30 IT/piece |
|
Mundorf MCap Evo capacitor, 22µF ±3%, 450VDC/310VAC, Ø50xL35mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-22T3.450
ME-22T3.450
|
Mundorf
€41.65 IT/piece |
|
Mundorf MCap Evo capacitor, 33µF ±3%, 450VDC/310VAC, Ø65xL35mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-33T3.450
ME-33T3.450
|
Mundorf
€49.99 IT/piece |
|
Mundorf MCap Evo capacitor, 47µF ±3%, 350VDC/240VAC, Ø50xL50mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-47T3.350
ME-47T3.350
|
Mundorf
€58.34 IT/piece |
|
Mundorf MCap Evo capacitor, 56µF ±3%, 350VDC/240VAC, Ø65xL50mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-56T3.350
ME-56T3.350
|
Mundorf
€66.68 IT/piece |
|
Mundorf MCap Evo capacitor, 68µF ±3%, 350VDC/240VAC, Ø65xL50mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-68T3.350
ME-68T3.350
|
Mundorf
€83.37 IT/piece |
|
Mundorf MCap Evo capacitor, 82µF ±3%, 350VDC/240VAC, Ø75xL50mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-82T3.350
ME-82T3.350
|
SETA
€0.88 IT/piece |
|
RWS 633 / RB 60 / RW 55 - 0.82
SETA vitreous wire wound resistor 0.82 ohm 10%, 10w, série RWS633/RB60/RW55, 34 x 7.5 mm
Résistance bobinée vitrifiée RWS633 0,82 Ohm 10W (+/-10%) (RB60 - RW55) |
SETA
€0.71 IT/piece |
|
RWS 633 / RB 60 / RW 55 - 0.68
SETA vitreous wire wound resistor 0.68 ohm 10%, 10w, série RWS633/RB60/RW55, 34 x 7.5 mm
Résistance bobinée vitrifiée RWS633 0,68 Ohm 10W (+/-10%) (RB60 - RW55) |
