Search results for 'B C'
Mundorf
€9.93 IT/piece |
|
Mundorf MCap Evo capacitor, 2.7µF ±3%, 450VDC/310VAC, Ø30xL21mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-2,70T3.450
ME-2,70T3.450
|
Mundorf
€10.78 IT/piece |
|
Mundorf MCap Evo capacitor, 3.3µF ±3%, 450VDC/310VAC, Ø30xL21mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-3,30T3.450
ME-3,30T3.450
|
Mundorf
€9.93 IT/piece |
|
Mundorf MCap Evo capacitor, 1.5µF ±3%, 450VDC/310VAC, Ø30xL16mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-1,50T3.450
ME-1,50T3.450
|
Mundorf
€9.93 IT/piece |
|
Mundorf MCap Evo capacitor, 1.8µF ±3%, 450VDC/310VAC, Ø25xL21mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-1,80T3.450
ME-1,80T3.450
|
Mundorf
€9.93 IT/piece |
|
Mundorf MCap Evo capacitor, 2.2µF ±3%, 450VDC/310VAC, Ø25xL21mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-2,20T3.450
ME-2,20T3.450
|
Mundorf
€9.93 IT/piece |
|
Mundorf MCap Evo capacitor, 0.1µF ±5%, 650VDC/440VAC, Ø12xL12mm
The MCap® EVO was designed in 2012 to replace the RXF series, it is made of a metallized polypropylene film with a thick layer of aluminum, then wound with precision according to the innovative winding geometry EVOLUTION, and finally potted by hand in special cases.
ME-0,10T5.650
ME-0,10T5.650
|
SETA
€2.10 IT/piece |
|
RWS 845 / RB 58 / RW 68 - 8200
SETA vitreous wire wound resistor 8200 ohm 5%, 16w, série RWS845/RB58/RW68, 46 x 9.5 mm
Résistance bobinée vitrifiée RWS845 8,2K Ohm 16W (+/-5%) (RB58 - RW68) |
SETA
€2.10 IT/piece |
|
RWS 845 / RB 58 / RW 68 - 6800
SETA vitreous wire wound resistor 6800 ohm 5%, 16w, série RWS845/RB58/RW68, 46 x 9.5 mm
Résistance bobinée vitrifiée RWS845 6,8K Ohm 16W (+/-5%) (RB58 - RW68) |
