Search results for 'phl audio'

The main purpose of these models is sound reinforcement direct radiation multi-way systems when the low freq. extension required does not allow types SP1040/1050 to operate in good conditions. Designed with higher Xmax capability types SP1060/1070 can be X-overed from as low as 400 Hz when single or 300 Hz when used in pairs, and will then exhibit all their sound quality potential.

Manufactured up to PHL AUDIO Quality standards, these rugged Contact Class models are cost effective alternatives to models SP1060/1070. Their application field in sound reinforcement is equivalent, while the compromise is situated in the accuracy of the upper frequencies. SP1140/1080 can be X-overed from as low as 400Hz when single, to 300Hz when used in pairs.

Mainly designed for sound reinforcement direct radiation multi way systems of small to medium throw (Bandpassed at 500Hz - 4000Hz in a sealed enclosure not exceeding 3L). Their use in conjunction with a suitable horn allows them to equip long throw systems with a sound quality superior to that produced by any other HF compression chamber.

These models are an excellent alternative to types SP1040/1050 when very high SPL are needed in sound reinforcement. Sound transcription is of utmost accuracy due to the mastery of the diaphragm behavior even at full level, which allows for their use in studio monitoring too. Direct radiation within frequency band 400Hz - 4000 Hz, in a sealed volume not exceeding 3L is possible while use with a horn loaded for high power systems is its real destination.

The PHL 1440 is a coaxial with two inputs, 6.5" nominal diametre (17cm), it is composed with a midbass cone driver (94dB/1w/1m, 8ohm) and a high frequency dome driver (95 dB/1w/1m, 6ohm) mounted coaxially. The coaxial PHL 1440 is able to cover frequencies from 50 to 20000 Hz, it requires a crossover to be used correctly. The PHL 1440 is good in a 12 Litre bass-reflex box accorded to 70Hz.

The PHL 1430 is a coaxial with two inputs, 6.5" nominal diametre (17cm), it is composed with a midbass cone driver (97dB/1w/1m, 8ohm) and a dome driver (95 dB/1w/1m, 6ohm) mounted coaxially. The coaxial PHL 1430 is able to cover frequencies from 200 to 20000 Hz, it requires a crossover to be used correctly. The PHL 1430 is good in a 3 Litre sealed box.

Very high sounding quality bass driver Sound quality optimized over sensitivity